From: =?gb2312?B?wO7wqQ==?= Date: Tue, 29 Aug 2006 16:47:22 +0800 Subject: [U-Boot-Users] Based on x86 build out u-boot image up to 1G!! Help!! Message-ID: <000001c6cb47$d1dc2560$12c809c0@18RDP> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, all! I am trying to build u-boot on sc520_cdp board. I have read all missives about sc520_cdp board, but still can?t solve my problem on HUGE size of u-boot.bin. After reading Mr. Jon Loeliger?s missive about _Why objdump Creates 4G U-Boot Images_, I know how to check the reason of u-boot. bin?s size. But after reading u-boot.lds in board/sc520_cdp/, I feel that I cannot change the mapping addresses, such as TEXT_BASE= 0x387c0000, and .bios 0 : AT ( LOADADDR(.realmode) + SIZEOF(.realmode) ) { *(.bios) }. According to Mr. Jon Loeliger?s missive, text section?s address(0x387c0000) and .bios section?s address(around 0) result in the huge size of u-boot.bin. But I know because after start up computer it is realmode in x86, .bios section should be mapped to low address. So I feel in dilemma right now. What should I do? Guys out there who have built out u-boot.bin based on x86 successfully please help me! Detailed information will be nice. David_leeh -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.denx.de/pipermail/u-boot/attachments/20060829/e4150977/attachment.htm