From: Frank Wang Date: Wed, 16 Dec 2015 10:39:16 +0800 Subject: [U-Boot] =?gb2312?b?tPC4tDogW1BBVENIIDEvMl0gdXNiOiBnYWRnZXQ6IHMz?= =?gb2312?b?Y191ZGNfb3RnOiBmaXhlZCBtYXggcGFja2V0IHNpemUgY2hlY2sg?= =?gb2312?b?Zm9yIGVwX2luIGluIGhpZ2ggc3BlZWQ=?= In-Reply-To: <20151207135826.1808bc41@amdc2363> References: <1449221794-52246-1-git-send-email-frank.wang@rock-chips.com> <1449221794-52246-2-git-send-email-frank.wang@rock-chips.com> <20151207135826.1808bc41@amdc2363> Message-ID: <000001d137aa$f5fa3ac0$e1eeb040$@rock-chips.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Lukasz, Sorry to reply you so late. The issue occur at below case, I have also attached some logs. fastboot_set_alt()--> usb_ep_enable(fs_ep_in) --> s3c_ep_enable() => => fastboot 0 s3c_udc_probe: 9ffaf938 0 s3c_alloc_request: ep0-control 9ffb176c Reseting OTG controller 0 0 Reseting OTG controller 0 0 0 nuke: ep0-control 9ffb176c pkt = 8006000100004000 0 *** s3c_queue: ep0-control-in req = 9df7adc0, len = 18, buf = 9df7cd80 empty = 1, stopped = 0 pkt = 1201000202020040 0722060099990102 0301 0 done: ep0-control 9ffb176c, req = 9df7adc0, stopped = 0 calling complete callback pkt[18] = 1201000202020040 0722060099990102 0301 callback completed 0 0 Reseting OTG controller 0 0 0 nuke: ep0-control 9ffb176c pkt = 0005040000000000 0 0 nuke: ep0-control 9ffb176c pkt = 8006000100001200 0 *** s3c_queue: ep0-control-in req = 9df7adc0, len = 18, buf = 9df7cd80 empty = 1, stopped = 0 pkt = 1201000202020040 0722060099990102 0301 0 done: ep0-control 9ffb176c, req = 9df7adc0, stopped = 0 calling complete callback pkt[18] = 1201000202020040 0722060099990102 0301 callback completed 0 0 nuke: ep0-control 9ffb176c pkt = 800600020000ff00 0 *** s3c_queue: ep0-control-in req = 9df7adc0, len = 32, buf = 9df7cd80 empty = 1, stopped = 0 pkt = 09022000010102c0 000904000002ff42 0304070581024000 0007050202000200 0 done: ep0-control 9ffb176c, req = 9df7adc0, stopped = 0 calling complete callback pkt[32] = 09022000010102c0 000904000002ff42 0304070581024000 0007050202000200 callback completed 0 0 nuke: ep0-control 9ffb176c pkt = 800600030000ff00 0 *** s3c_queue: ep0-control-in req = 9df7adc0, len = 4, buf = 9df7cd80 empty = 1, stopped = 0 pkt = 04030904 0 done: ep0-control 9ffb176c, req = 9df7adc0, stopped = 0 calling complete callback pkt[4] = 04030904 callback completed 0 0 nuke: ep0-control 9ffb176c pkt = 8006000100001200 0 *** s3c_queue: ep0-control-in req = 9df7adc0, len = 18, buf = 9df7cd80 empty = 1, stopped = 0 pkt = 1201000202020040 0722060099990102 0301 0 done: ep0-control 9ffb176c, req = 9df7adc0, stopped = 0 calling complete callback pkt[18] = 1201000202020040 0722060099990102 0301 callback completed 0 0 nuke: ep0-control 9ffb176c pkt = 8006000100001200 0 *** s3c_queue: ep0-control-in req = 9df7adc0, len = 18, buf = 9df7cd80 empty = 1, stopped = 0 pkt = 1201000202020040 0722060099990102 0301 0 done: ep0-control 9ffb176c, req = 9df7adc0, stopped = 0 calling complete callback pkt[18] = 1201000202020040 0722060099990102 0301 callback completed 0 0 nuke: ep0-control 9ffb176c pkt = 8006000200000900 0 *** s3c_queue: ep0-control-in req = 9df7adc0, len = 9, buf = 9df7cd80 empty = 1, stopped = 0 pkt = 09022000010102c0 00 0 done: ep0-control 9ffb176c, req = 9df7adc0, stopped = 0 calling complete callback pkt[9] = 09022000010102c0 00 callback completed 0 0 nuke: ep0-control 9ffb176c pkt = 8006000200002000 0 *** s3c_queue: ep0-control-in req = 9df7adc0, len = 32, buf = 9df7cd80 empty = 1, stopped = 0 pkt = 09022000010102c0 000904000002ff42 0304070581024000 0007050202000200 0 done: ep0-control 9ffb176c, req = 9df7adc0, stopped = 0 calling complete callback pkt[32] = 09022000010102c0 000904000002ff42 0304070581024000 0007050202000200 callback completed 0 0 nuke: ep0-control 9ffb176c pkt = 8000000000000200 crq->brequest:0x0 0 0 0 nuke: ep0-control 9ffb176c pkt = 0009010000000000 fastboot_set_alt: func: f_fastboot intf: 0 alt: 0 s3c_ep_enable: 9ffb1804 s3c_udc_set_nak: ep_num = 2, ep_type = 1 s3c_udc_set_nak: set NAK, DOEPCTL2 = 0x40020000 s3c_udc_set_halt: ep_num = 2, value = 0 0 s3c_udc_ep_clear_stall: ep_num = 2, ep_type = 1 s3c_udc_ep_clear_stall: cleared stall, DOEPCTL2 = 0x40020000 0 s3c_udc_ep_activate: EPCTRL2 = 0x40020000, ep_is_in = 0 s3c_udc_ep_activate: USB Ative EP2, DOEPCTRL2 = 0x400a8200 s3c_udc_ep_activate: DAINTMSK = 0x50001 s3c_ep_enable: enabled ep2out-bulk, stopped = 0, maxpacket = 512 s3c_alloc_request: ep2out-bulk 9ffb1804 s3c_ep_enable: 9ffb17b8 s3c_ep_enable: desc->wMaxPacketSize=64, ep->maxpacket=512 s3c_ep_enable: bad ep1in-bulk maxpacket failed to enable in ep s3c_ep_disable: 9ffb1804 0 nuke: ep2out-bulk 9ffb1804 s3c_ep_disable: disabled ep2out-bulk s3c_ep_disable: 9ffb17b8 s3c_ep_disable: ep1in-bulk not enabled s3c_free_request: 9ffb1804 s3c_ep_disable: 9ffb1804 s3c_ep_disable: ep2out-bulk not enabled s3c_ep_disable: 9ffb17b8 s3c_ep_disable: ep1in-bulk not enabled 0 nuke: ep0-control 9ffb176c pkt = 8006000100001200 0 BR. Frank -----????----- ???: Lukasz Majewski [mailto:l.majewski at samsung.com] ????: 2015?12?7? 20:58 ???: Frank Wang ??: marex at denx.de; trini at konsulko.com; u-boot at lists.denx.de; benchan at chromium.org; kmixter at chromium.org; sjg at chromium.org; cf at rock-chips. com ??: Re: [PATCH 1/2] usb: gadget: s3c_udc_otg: fixed max packet size check for ep_in in high speed Hi Frank, > In current fastboot frame, both full and high speed use 'fs_ep_in', > but fs_ep_in.wMaxPacketSize is configurated 64 bytes as default, Because 64 bytes is the smallest possible packet size. > I do not understand why high speed TX max packet size is also set as > 64 bytes, According to struct s3c_udc @ s3c_udc_otg.c only the EP0 has maxpacket set to 64 bytes. Rest is set to 512B. Frank could you shed some light on conditions when this error shows up? Some logs/condition of operation could be helpful. > so I changed the condition from '!=' to '>' as a workaround. Instead of applying workaround, lets focus on your problem. > > Signed-off-by: Frank Wang > --- > drivers/usb/gadget/s3c_udc_otg.c | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/gadget/s3c_udc_otg.c > b/drivers/usb/gadget/s3c_udc_otg.c index 7a2d1e7..b2d3988 100644 > --- a/drivers/usb/gadget/s3c_udc_otg.c > +++ b/drivers/usb/gadget/s3c_udc_otg.c > @@ -556,8 +556,8 @@ static int s3c_ep_enable(struct usb_ep *_ep, > } > > /* hardware _could_ do smaller, but driver doesn't */ > - if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK > - && le16_to_cpu(get_unaligned(&desc->wMaxPacketSize)) != > + if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK && > + le16_to_cpu(get_unaligned(&desc->wMaxPacketSize)) > > ep_maxpacket(ep)) > || !get_unaligned(&desc->wMaxPacketSize)) { > debug("%s: bad %s maxpacket\n", __func__, _ep->name); -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group