From: "Chris Bennett" Date: Tue, 12 Apr 2005 04:05:14 +0000 Subject: Re: [LARTC] HTB ATM MPU OVERHEAD (without any patching) Message-Id: <000601c53f14$d4772100$200fa8c0@DELTA> List-Id: References: <001001c53ef2$d4a1d2f0$200fa8c0@DELTA> In-Reply-To: <001001c53ef2$d4a1d2f0$200fa8c0@DELTA> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org I'm running some tests as you suggested. I'll have to wait til there are more players on my servers again before I can get some more accurate results, but preliminary tests show that 1) the overhead setting is quite significant and 2) my overhead value of 24 is a bit too low. With overhead set at 24, the latency for the players is initially not greatly affected by adding an FTP transfer to the mix, but when I let the FTP run for a long time eventually the latency starts climbing. This would seem to indicate that something in the calculation is not quite right, and a buffer somewhere is slowly filling up. This is just preliminary... hopefully I'll have something more solid tomorrow. ----- Original Message ----- From: "Jason Boxman" To: Sent: Monday, April 11, 2005 7:14 PM Subject: Re: [LARTC] HTB ATM MPU OVERHEAD (without any patching) > Those are always the thoughts I had. I never successfully played around > with > overhead or MPU though. Did you compare results with and without using > overhead and mpu settings? _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc