From: "Craig D. Lansing" Subject: RE: [parisc-linux] J2240 - Almost there.... Date: Wed, 4 Jan 2006 23:08:03 -0500 Message-ID: <000601c611ad$a02a50e0$3401a8c0@POGO> References: <20060104181854.GE20079@colo.lackof.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Cc: parisc-linux@lists.parisc-linux.org To: "'Grant Grundler'" , "'Matthew Wilcox'" Return-Path: In-Reply-To: <20060104181854.GE20079@colo.lackof.org> List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: parisc-linux-bounces@lists.parisc-linux.org I forgot about the built-in LAN port. I moved the cable to that one and all was working from HP-UX, so I restarted the Debian install from CD... it sure works much better now!!!! The installer doesn't ask for the network info anymore (i.e. got an IP address from DHCP and did not ask for DNS info, gateway, etc.), automagically selected eth1 (I guess that implies that eth1 is the built-in and eth0 is the card), and no longer whines about not being able to reach security.debian.org. The installer has been busily installing packages for at least 3 hours. 1. Blew up / hung once on: Setting up libatk1.0-0 (1.8.0-4) ... module ipv6 relocation of symbol ipv6_chk_addr is out of range (0x3ff3fffd in 17 bits). 2. Power cycled, booted I get the "module ipv6..." errors when portmap, PostgreSQL, and Apache2 daemons start. 3. Restarted install via "apt-get -f install". This is my first attempt at Debian, so I am not APT literate. This is just what I was prompted to do when I tried to install one package. Installer is still chugging. This appears to be a good sign. -----Original Message----- From: parisc-linux-bounces@lists.parisc-linux.org [mailto:parisc-linux-bounces@lists.parisc-linux.org] On Behalf Of Grant Grundler Sent: Wednesday, January 04, 2006 1:19 PM To: Matthew Wilcox Cc: parisc-linux@lists.parisc-linux.org Subject: Re: [parisc-linux] J2240 - Almost there.... On Wed, Jan 04, 2006 at 10:49:43AM -0700, Matthew Wilcox wrote: ... > > 0000:00:03.0 is tulip in slot 3. > > 0000:01:14.0 is tulip built-in. (my guess) > > I disagree. The 'Cujo' on GSC bus 8 is actually a Dino. As I said > in my earlier mail, I've now fixed this. I couldn't tell if the names were wrong offhand - needed ioscan output (got it) and compare. Thanks for fixing this. > So I think eth0 (00:03.0) is actually the built-in one. I think I got this right despite PCI controller names. Workstations typically hardwired the PCI slot to use the same device number (e.g. 3) as what is silk screened on the back of the machine. Built-in devices were typically given numbers much greater than the highest slot number. Servers never did this just because that scheme doesn't work multi-cell systems with > 32 PCI slots (e.g. superdome) or multiple IO bays with identical silk screened slot numbers. thanks, grant _______________________________________________ parisc-linux mailing list parisc-linux@lists.parisc-linux.org http://lists.parisc-linux.org/mailman/listinfo/parisc-linux _______________________________________________ parisc-linux mailing list parisc-linux@lists.parisc-linux.org http://lists.parisc-linux.org/mailman/listinfo/parisc-linux