From: Peter Pearse Date: Thu, 31 Jan 2008 13:35:45 -0000 Subject: [U-Boot-Users] FW: CUSTODIANS: List of open issues / not appliedpatches In-Reply-To: <000401c85396$9bee3aa0$9a4d010a@Emea.Arm.com> Message-ID: <000701c8640e$2ed61180$9a4d010a@Emea.Arm.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Wolfgang Here's the status of the unapplied ARM patches (in your list), sorry it took so long. 10810 10/25 Johannes Stezenba [U-Boot-Users] [patch 0/3] KB9202 CodeSourcery ARM EABI toolchain bu Declined - compiler specific plus code change required, rather than #define change Full ARM compile option patch to come mov r0, r0, #constant patch to come 11193 11/07 llandre [U-Boot-Users] [PATCH] ARM optimized memcpy/memmove routines In test - currently still contains kernel depencies 12002 12/06 Ladislav Michl [U-Boot-Users] [PATCH] ARM: Fix at91rm9200dk base address Ready @ git://linux-arm.org/u-boot-armdev.git#071206_at91_base 12003 12/06 Ladislav Michl [U-Boot-Users] [PATCH] ARM: AT91RM9200 based boards config cleanup Ready @ git://linux-arm.org/u-boot-armdev.git#071206_at91_bdinfo 12007 12/07 Ladislav Michl [U-Boot-Users] [PATCH] ARM: Board voiceblue update Ready @ git://linux-arm.org/u-boot-armdev.git#071212_voiceblue 12382 12/18 Hebbar Re: [U-Boot-Users] [PATCH] ARM926: compile cpu_init_crit function on * 12383 12/18 Hebbar Re: [U-Boot-Users] [PATCH] ARM926: Remove compiler warning: target C * 12384 12/18 Hebbar Re: [U-Boot-Users] [PATCH] ARM: I2C Init function call in lib_arm/bo * All still under consideration 12385 12/18 Hebbar Re: [U-Boot-Users] [PATCH] ARM926: Display Ethernet info in do_bdinf * I believe some will be covered 12395 12/19 "Gururaja Hebbar Re: [U-Boot-Users] [PATCH] ARM926: compile cpu_init_crit function on * my the compiler options patch 12396 12/19 Dirk Behme Re: [U-Boot-Users] [PATCH] ARM926: compile cpu_init_crit function on * 12404 12/19 Harald Welte [U-Boot-Users] [PATCH] ARM: arm920/s3c24xx: IRQ demulitplexer callba Ready @ git://linux-arm.org/u-boot-armdev.git#071219_s3c2410_irq 12405 12/19 Harald Welte [U-Boot-Users] [PATCH] ARM: arm920t: Allow use of 'gd' pointer from Ready @ git://linux-arm.org/u-boot-armdev.git#071219_s3c24_gd 12408 12/19 Harald Welte [U-Boot-Users] [PATCH] ARM: s3c24xx: Multiple serial port support Ready @ git://linux-arm.org/u-boot-armdev.git#071219_s3c24_serial 12412 12/19 Harald Welte [U-Boot-Users] [PATCH] ARM: S3C24x0 SoC NAND controller support Ready @ git://linux-arm.org/u-boot-armdev.git#071219_s3c24_nand Harald and Ladislav's patches have all been checked to build with MAKEALL arm, mips, ppc Would it be helpful if I made one branch with all (7) of their patches applied? Regards Peter