Return-Path: Received: by yocto-www.yoctoproject.org (Postfix, from userid 118) id 51259E00CC8; Mon, 18 Feb 2019 05:48:18 -0800 (PST) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on yocto-www.yoctoproject.org X-Spam-Level: X-Spam-Status: No, score=-2.6 required=5.0 tests=BAYES_00,HTML_MESSAGE, RCVD_IN_DNSWL_LOW autolearn=ham version=3.3.1 X-Spam-HAM-Report: * -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% * [score: 0.0000] * -0.7 RCVD_IN_DNSWL_LOW RBL: Sender listed at http://www.dnswl.org/, low * trust * [212.95.66.15 listed in list.dnswl.org] * 0.0 HTML_MESSAGE BODY: HTML included in message Received: from itinerix.sdv.fr (itinerix.sdv.fr [212.95.66.15]) by yocto-www.yoctoproject.org (Postfix) with ESMTP id 26DAFE00C38 for ; Mon, 18 Feb 2019 05:48:12 -0800 (PST) Received: from FIXNIKOLA (unknown [65.39.68.243]) by itinerix.sdv.fr (Postfix) with ESMTPSA id D78C3DDB7; Mon, 18 Feb 2019 14:48:08 +0100 (CET) From: "Stanisavljevic" To: "'Zoran Stojsavljevic'" References: <001101d4bc79$b2739150$175ab3f0$@polycaptil.fr> <003801d4bd38$cd620b80$68262280$@polycaptil.fr> In-Reply-To: Date: Mon, 18 Feb 2019 14:48:07 +0100 Message-ID: <000b01d4c790$95ede180$c1c9a480$@polycaptil.fr> MIME-Version: 1.0 X-Mailer: Microsoft Outlook 16.0 Thread-Index: AQFdDXE0Al97Hf8UDVuxHsFyUtiQ2gGO1GxuAuepHyYCJEUylQEyThizppac63A= Cc: 'Yocto Project' Subject: Re: yocto touchscreen X-BeenThere: yocto@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Discussion of all things Yocto Project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 18 Feb 2019 13:48:18 -0000 Content-Type: multipart/alternative; boundary="----=_NextPart_000_000C_01D4C798.F7B9EAA0" Content-Language: fr ------=_NextPart_000_000C_01D4C798.F7B9EAA0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Thank you Zoran for trying to help me. I tried to resolve the problem, but I didn=E2=80=99t succeed yet, I = think I will to continue, and If after some time I find nothing, = I=E2=80=99m going to migrate to the thud version. =20 I will maybe try to use Bugzilla =20 Nikola De : Zoran Stojsavljevic =20 Envoy=C3=A9 : mardi 5 f=C3=A9vrier 2019 19:28 =C3=80 : Stanisavljevic Cc : Yocto Project ; marc.ferland@gmail.com Objet : Re: [yocto] yocto touchscreen =20 Hello Nikola, Let us try to cut to the chase! After reading what Marc Ferland says/writes, and looking into the = following: https://bugzilla.redhat.com/show_bug.cgi?id=3D1650634 I have spotted the following: Pat Riehecky 2018-11-20 14:28:22 UTC=20 the bug remains with the elrepo kernels: kernel-ml-4.19.2-1.el7.elrepo.x86_64 kernel-lt-4.4.163-1.el7.elrepo.x86_64 I never had this problem since I do not use Xorg (GFX), rather I only use serial console from VBox VM from my BBB (pass-through). =20 Thus, my suggestion for you, to skip the whole mess is to rebuild your distro in the light of YOCTO Project 2.6.1 (thud 20.0.0.1). =20 My best guess (then you'll inherit YOCTO kernel 4.20.x with fixed Xorg - = X11). =20 I am using Fedora 29 on my laptop. Also from the bugzilla: Pat Riehecky 2018-11-20 15:46:11 UTC=20 Bug resolved by rebuilding xorg-x11-server-1.20.3-1.fc29 [1] for 7.6. With this in mind it appears to be an Xorg server bug rather than fbdev. =20 From my HP EliteBook 840 G1 Fedora 29, Xorg.0.log - February 5th, 2019., I have the following: =20 [ 26.955] Kernel command line: = BOOT_IMAGE=3D/vmlinuz-4.20.6-200.fc29.x86_64 root=3D/dev/mapper/fedora-root ro rd.lvm.lv = =3Dfedora/root rd.lvm.lv =3Dfedora/swap rhgb quiet LANG=3Den_US.UTF-8 [ 26.955] Build Date: 11 January 2019 12:47:38PM [ 26.955] Build ID: xorg-x11-server 1.20.3-3.fc29 [ 26.955] Current version of pixman: 0.34.0 Best Regards, Zoran _______ On Tue, Feb 5, 2019 at 2:49 PM Zoran Stojsavljevic = > = wrote: > > Hello Nikola, > > > I created a kernel recipe with a bbappend file, and, I added > > the same defconfig that I used for krogoth version. > > The bbappend for kernel recipe concern meta-ti layer. > > I didn't edited defconfig file in other layers which contain a > > kernel recipe. > > It could be some problem that Sumo does not take your bbappend file = into the > consideration as placed. > > It could be something else, as well. > > I have the same issue with my defconfig file for my Thud Beagle Bone = Black (BBB) > standard board. Every time I recompile my YOCTO for it for different = releases, I need > to import my specific defconfig. But I use complete different repos = for my standard > Beagle Bone Black than YOCTO BBB Poky reference distro. > > Here is what I use in Thud (my bblayers.conf): > > POKY_BBLAYERS_CONF_VERSION =3D "2" > BBPATH =3D "${TOPDIR}" > BBFILES ?=3D "" > > BBLAYERS ?=3D " \ > /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb \ > = /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-n= etworking \ > = /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-o= e \ > = /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-p= ython \ > /home/user/projects2/beaglebone-black/yocto-thud/meta-qt5 \ > /home/user/projects2/beaglebone-black/yocto-thud/poky/meta \ > /home/user/projects2/beaglebone-black/yocto-thud/poky/meta-poky" > > There, I replace defconfig in this layer: = /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb > with my own defconfig. > > In the directory: > = /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb/recipes-kernel/= linux/linux-stable-4.19/beaglebone > > If you use only Poky repository, then you need to read the following = paragraph (how to use > your defconfig with Poky): > > [2.3.3. Changing the Configuration] YOCTO Project Linux Development = Manual > = https://www.yoctoproject.org/docs/2.5/kernel-dev/kernel-dev.html#using-an= -in-tree-defconfig-file > 2.3.3. Changing the Configuration > > I hope this will help. Please, keep us posted! > > Zoran > _______ > > > On Tue, Feb 5, 2019 at 10:54 AM Stanisavljevic = = > wrote: >> >> Hy Zoran >> >> Thank's to take time to answer >> >> I created a kernel recipe with a bbappend file, and, I added the same = defconfig that I used for krogoth version. >> The bbappend for kernel recipe concern meta-ti layer. >> I didn't edited defconfig file in other layers which contain a kernel = recipe. >> >> I think it's a problem which concern the screen resolution, screen = frequency and adc touchscreen. >> Something is different between the krogoth and sumo version, but I = didn't find what is changed... >> >> Xrandr show that problem is maybe around the screen resolution. >> It's show the next message : "Size 1024x768 not found in available = modes" >> Maybe it was changed between krogoth and sumo version...but I don't = know where it is indicated if sources files... >> >> What do you think ? problem can be around the screen resolution, = screen frequency and adc touchscreen ? >> >> Nikola >> >> -----Message d'origine----- >> De : Zoran Stojsavljevic > >> Envoy=C3=A9 : lundi 4 f=C3=A9vrier 2019 17:08 >> =C3=80 : Stanisavljevic > >> Cc : Yocto Project > >> Objet : Re: [yocto] yocto touchscreen >> >> > I built a first version of this os with version krogoth and it = works fine. >> > >> > Now I build a second version of this os with version sumo and the >> > touch screen works fine during boot process but when kernel is = loaded, >> > touchscreen freeze / lock and impossible to use it. >> >> Did you compare Krogoth kernel defconfig with Sumo kernel defconfig? >> >> May there are some mismatches in drivers' setup between these two? >> >> Zoran >> _______ >> >> On Mon, Feb 4, 2019 at 12:24 PM Stanisavljevic = = > wrote: >> > >> > Hy Team, >> > >> > >> > >> > I have a problem >> > >> > >> > >> > I buid a custom os for AM335x processor and I used yocto to do it. >> > >> > >> > >> > I build a first version of this os with version krogoth and it work = fine. >> > >> > >> > >> > Now I build a second version of this os with version sumo and the = touchscreen work fine during boot process but when kernel is loaded, = touchscreen freeze / lock and impossible to use it. >> > >> > The terminal is printed on the touchscreen but the screen is = locked, impossible to write a command or to move the mouse to select, = =E2=80=A6. >> > >> > >> > >> > Here is the log of boot to the user session (log got with serial = communication between PC and board) : >> > >> > >> > >> > U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57) >> > >> > Trying to boot from MMC1 >> > >> > reading uboot.env >> > >> > reading u-boot.img >> > >> > reading u-boot.img >> > >> > reading u-boot.img >> > >> > reading u-boot.img >> > >> > >> > >> > >> > >> > U-Boot 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200) >> > >> > >> > >> > CPU : AM335X-GP rev 2.1 >> > >> > Model: TI AM335x EVM-SK >> > >> > DRAM: 256 MiB >> > >> > NAND: 0 MiB >> > >> > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 >> > >> > reading uboot.env >> > >> > ERROR: No USB device found >> > >> > >> > >> > at drivers/usb/gadget/ether.c:2709/usb_ether_init() >> > >> > Net: CACHE: Misaligned operation at range [8df323c0, 8df32464] >> > >> > >> > >> > Warning: ethernet@4a100000 using MAC address from ROM >> > >> > eth0: ethernet@4a100000 >> > >> > Hit any key to stop autoboot: 0 >> > >> > reading zImage >> > >> > 3412752 bytes read in 251 ms (13 MiB/s) >> > >> > reading dtb >> > >> > 39733 bytes read in 12 ms (3.2 MiB/s) >> > >> > ## Flattened Device Tree blob at 82000000 >> > >> > Booting using the fdt blob at 0x82000000 >> > >> > Loading Device Tree to 8df19000, end 8df25b34 ... OK >> > >> > >> > >> > Starting kernel ... >> > >> > >> > >> > [ 0.000000] Booting Linux on physical CPU 0x0 >> > >> > [ 0.000000] Initializing cgroup subsys cpu >> > >> > [ 0.000000] Initializing cgroup subsys cpuacct >> > >> > [ 0.000000] Linux version 4.4.19-ge581bb1cac = (polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 = PREEMPT Thu May 24 11:42:17 CEST 2018 >> > >> > [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), = cr=3D10c5387d >> > >> > [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT = aliasing instruction cache >> > >> > [ 0.000000] Machine model: TI AM335x EVM-SK >> > >> > [ 0.000000] cma: Reserved 48 MiB at 0x8a800000 >> > >> > [ 0.000000] Memory policy: Data cache writeback >> > >> > [ 0.000000] CPU: All CPU(s) started in SVC mode. >> > >> > [ 0.000000] AM335X ES2.1 (sgx neon ) >> > >> > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping = on. Total pages: 64960 >> > >> > [ 0.000000] Kernel command line: console=3DttyO0,115200 = root=3D/dev/mmcblk0p3 rw >> > >> > [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) >> > >> > [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, = 131072 bytes) >> > >> > [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, = 65536 bytes) >> > >> > [ 0.000000] Memory: 200444K/262144K available (6495K kernel = code, 313K rwdata, 2368K rodata, 260K init, 265K bss, 12548K reserved, = 49152K cma-reserved, 0K highmem) >> > >> > [ 0.000000] Virtual kernel memory layout: >> > >> > [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) >> > >> > [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) >> > >> > [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) >> > >> > [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) >> > >> > [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) >> > >> > [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) >> > >> > [ 0.000000] .text : 0xc0008000 - 0xc08b0034 (8865 kB) >> > >> > [ 0.000000] .init : 0xc08b1000 - 0xc08f2000 ( 260 kB) >> > >> > [ 0.000000] .data : 0xc08f2000 - 0xc09407f0 ( 314 kB) >> > >> > [ 0.000000] .bss : 0xc09407f0 - 0xc0982d58 ( 266 kB) >> > >> > [ 0.000000] SLUB: HWalign=3D64, Order=3D0-3, MinObjects=3D0, = CPUs=3D1, Nodes=3D1 >> > >> > [ 0.000000] Preemptible hierarchical RCU implementation. >> > >> > [ 0.000000] Build-time adjustment of leaf fanout to 32. >> > >> > [ 0.000000] NR_IRQS:16 nr_irqs:16 16 >> > >> > [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with = 128 interrupts >> > >> > [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz >> > >> > [ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, = wraps every 89478484971ns >> > >> > [ 0.000036] clocksource: timer1: mask: 0xffffffff max_cycles: = 0xffffffff, max_idle_ns: 79635851949 ns >> > >> > [ 0.000047] OMAP clocksource: timer1 at 24000000 Hz >> > >> > [ 0.000222] clocksource_probe: no matching clocksources found >> > >> > [ 0.000415] Console: colour dummy device 80x30 >> > >> > [ 0.000442] WARNING: Your 'console=3DttyO0' has been replaced by = 'ttyS0' >> > >> > [ 0.000448] This ensures that you still see kernel messages. = Please >> > >> > [ 0.000454] update your kernel commandline. >> > >> > [ 0.000473] Calibrating delay loop... 795.44 BogoMIPS = (lpj=3D3977216) >> > >> > [ 0.089064] pid_max: default: 32768 minimum: 301 >> > >> > [ 0.089193] Mount-cache hash table entries: 1024 (order: 0, 4096 = bytes) >> > >> > [ 0.089205] Mountpoint-cache hash table entries: 1024 (order: 0, = 4096 bytes) >> > >> > [ 0.089932] Initializing cgroup subsys io >> > >> > [ 0.089964] Initializing cgroup subsys memory >> > >> > [ 0.090005] Initializing cgroup subsys devices >> > >> > [ 0.090021] Initializing cgroup subsys freezer >> > >> > [ 0.090036] Initializing cgroup subsys perf_event >> > >> > [ 0.090048] Initializing cgroup subsys pids >> > >> > [ 0.090078] CPU: Testing write buffer coherency: ok >> > >> > [ 0.090499] Setting up static identity map for 0x80008200 - = 0x80008258 >> > >> > [ 0.092680] devtmpfs: initialized >> > >> > [ 0.105440] VFP support v0.3: implementor 41 architecture 3 part = 30 variant c rev 3 >> > >> > [ 0.120529] omap_hwmod: debugss: _wait_target_disable failed >> > >> > [ 0.175584] clocksource: jiffies: mask: 0xffffffff max_cycles: = 0xffffffff, max_idle_ns: 19112604462750000 ns >> > >> > [ 0.179852] pinctrl core: initialized pinctrl subsystem >> > >> > [ 0.181216] NET: Registered protocol family 16 >> > >> > [ 0.183420] DMA: preallocated 256 KiB pool for atomic coherent = allocations >> > >> > [ 0.209061] cpuidle: using governor ladder >> > >> > [ 0.239048] cpuidle: using governor menu >> > >> > [ 0.243661] OMAP GPIO hardware version 0.1 >> > >> > [ 0.254360] hw-breakpoint: debug architecture 0x4 unsupported. >> > >> > [ 0.297629] edma 49000000.edma: TI EDMA DMA engine driver >> > >> > [ 0.298606] reg-fixed-voltage fixedregulator@2: could not find = pctldev for node = /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, = deferring probe >> > >> > [ 0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for = node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, = deferring probe >> > >> > [ 0.302525] media: Linux media interface: v0.10 >> > >> > [ 0.302588] Linux video capture interface: v2.00 >> > >> > [ 0.302638] pps_core: LinuxPPS API ver. 1 registered >> > >> > [ 0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 = Rodolfo Giometti > >> > >> > [ 0.302676] PTP clock support registered >> > >> > [ 0.302741] EDAC MC: Ver: 3.0.0 >> > >> > [ 0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev = 0x400 >> > >> > [ 0.304332] Advanced Linux Sound Architecture Driver = Initialized. >> > >> > [ 0.305512] clocksource: Switched to clocksource timer1 >> > >> > [ 0.316775] NET: Registered protocol family 2 >> > >> > [ 0.317599] TCP established hash table entries: 2048 (order: 1, = 8192 bytes) >> > >> > [ 0.317636] TCP bind hash table entries: 2048 (order: 1, 8192 = bytes) >> > >> > [ 0.317663] TCP: Hash tables configured (established 2048 bind = 2048) >> > >> > [ 0.317748] UDP hash table entries: 256 (order: 0, 4096 bytes) >> > >> > [ 0.317767] UDP-Lite hash table entries: 256 (order: 0, 4096 = bytes) >> > >> > [ 0.317925] NET: Registered protocol family 1 >> > >> > [ 0.318352] RPC: Registered named UNIX socket transport module. >> > >> > [ 0.318366] RPC: Registered udp transport module. >> > >> > [ 0.318372] RPC: Registered tcp transport module. >> > >> > [ 0.318379] RPC: Registered tcp NFSv4.1 backchannel transport = module. >> > >> > [ 0.319330] hw perfevents: enabled with armv7_cortex_a8 PMU = driver, 5 counters available >> > >> > [ 0.321392] futex hash table entries: 256 (order: -1, 3072 = bytes) >> > >> > [ 0.329780] squashfs: version 4.0 (2009/01/31) Phillip Lougher >> > >> > [ 0.330717] NFS: Registering the id_resolver key type >> > >> > [ 0.330798] Key type id_resolver registered >> > >> > [ 0.330807] Key type id_legacy registered >> > >> > [ 0.330886] ntfs: driver 2.1.32 [Flags: R/O]. >> > >> > [ 0.334673] Block layer SCSI generic (bsg) driver version 0.4 = loaded (major 248) >> > >> > [ 0.334706] io scheduler noop registered >> > >> > [ 0.334719] io scheduler deadline registered >> > >> > [ 0.334877] io scheduler cfq registered (default) >> > >> > [ 0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa = f9e10800 size 568 >> > >> > [ 0.339415] backlight supply power not found, using dummy = regulator >> > >> > [ 0.402480] Serial: 8250/16550 driver, 10 ports, IRQ sharing = disabled >> > >> > [ 0.406962] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq =3D = 158, base_baud =3D 3000000) is a 8250 >> > >> > [ 1.017357] console [ttyS0] enabled >> > >> > [ 1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq =3D = 159, base_baud =3D 3000000) is a 8250 >> > >> > [ 1.032273] [drm] Initialized drm 1.1.0 20060810 >> > >> > [ 1.039564] [drm] Supports vblank timestamp caching Rev 2 = (21.10.2013). >> > >> > [ 1.046349] [drm] No driver support for vblank timestamp query. >> > >> > [ 1.062121] Console: switching to colour frame buffer device = 60x34 >> > >> > [ 1.070360] tilcdc 4830e000.lcdc: fb0: frame buffer device >> > >> > [ 1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0 >> > >> > [ 1.118644] loop: module loaded >> > >> > [ 1.124253] libphy: Fixed MDIO Bus: probed >> > >> > [ 1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision = 1.6 >> > >> > [ 1.191695] davinci_mdio 4a101000.mdio: detected phy mask = fffffffe >> > >> > [ 1.198786] libphy: 4a101000.mdio: probed >> > >> > [ 1.202886] davinci_mdio 4a101000.mdio: phy[0]: device = 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 >> > >> > [ 1.212890] cpsw 4a100000.ethernet: Detected MACID =3D = a0:f6:fd:4c:a6:ba >> > >> > [ 1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID =3D = c4:ed:ba:88:2a:92 >> > >> > [ 1.229382] mousedev: PS/2 mouse device common for all mice >> > >> > [ 1.235845] i2c /dev entries driver >> > >> > [ 1.240508] cpuidle: enable-method property 'ti,am3352' found = operations >> > >> > [ 1.248197] omap_hsmmc 48060000.mmc: Got CD GPIO >> > >> > [ 1.275713] pinctrl-single 44e10800.pinmux: bad data for mux = pinmux_mmc2_pins >> > >> > [ 1.282895] pinctrl-single 44e10800.pinmux: no pins entries for = pinmux_mmc2_pins >> > >> > [ 1.317159] ledtrig-cpu: registered to indicate activity on CPUs >> > >> > [ 1.326069] NET: Registered protocol family 10 >> > >> > [ 1.332092] sit: IPv6 over IPv4 tunneling driver >> > >> > [ 1.337715] NET: Registered protocol family 17 >> > >> > [ 1.342510] Key type dns_resolver registered >> > >> > [ 1.347095] omap_voltage_late_init: Voltage driver support not = added >> > >> > [ 1.407145] tps65910-rtc tps65910-rtc: rtc core: registered = tps65910-rtc as rtc0 >> > >> > [ 1.415278] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz >> > >> > [ 1.421665] omap_hsmmc 48060000.mmc: Got CD GPIO >> > >> > [ 1.426813] vmmc: supplied by vbat >> > >> > [ 1.466341] pinctrl-single 44e10800.pinmux: bad data for mux = pinmux_mmc2_pins >> > >> > [ 1.474737] pinctrl-single 44e10800.pinmux: no pins entries for = pinmux_mmc2_pins >> > >> > [ 1.513247] mmc0: host does not support reading read-only = switch, assuming write-enable >> > >> > [ 1.523414] mmc0: new high speed SDHC card at address 0001 >> > >> > [ 1.529635] mmcblk0: mmc0:0001 AS 3.72 GiB >> > >> > [ 1.535996] mmcblk0: p1 p2 p3 >> > >> > [ 1.595932] vdd_mpu: supplied by vbat >> > >> > [ 1.602167] input: gpio_buttons@0 as = /devices/platform/gpio_buttons@0/input/input0 >> > >> > [ 1.618291] tps65910-rtc tps65910-rtc: setting system clock to = 2019-02-01 20:07:49 UTC (1549051669) >> > >> > [ 1.639394] lis3_reg: disabling >> > >> > [ 1.655732] ALSA device list: >> > >> > [ 1.658720] No soundcards found. >> > >> > [ 1.678290] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to = feature incompatibilities >> > >> > [ 1.696920] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to = feature incompatibilities >> > >> > [ 2.183999] EXT4-fs (mmcblk0p3): recovery complete >> > >> > [ 2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered = data mode. Opts: (null) >> > >> > [ 2.205084] VFS: Mounted root (ext4 filesystem) on device 179:3. >> > >> > [ 2.225670] devtmpfs: mounted >> > >> > [ 2.235781] Freeing unused kernel memory: 260K (c08b1000 - = c08f2000) >> > >> > [ 2.242162] This architecture does not have kernel memory = protection. >> > >> > INIT: version 2.88 booting >> > >> > Starting udev >> > >> > [ 3.090091] udevd[78]: starting version 3.2.5 >> > >> > [ 3.106175] random: udevd: uninitialized urandom read (16 bytes = read, 26 bits of entropy available) >> > >> > [ 3.118667] random: udevd: uninitialized urandom read (16 bytes = read, 26 bits of entropy available) >> > >> > [ 3.128014] random: udevd: uninitialized urandom read (16 bytes = read, 26 bits of entropy available) >> > >> > [ 3.137335] random: udevd: uninitialized urandom read (16 bytes = read, 26 bits of entropy available) >> > >> > [ 3.218433] udevd[79]: starting eudev-3.2.5 >> > >> > [ 3.325886] random: udevd: uninitialized urandom read (16 bytes = read, 29 bits of entropy available) >> > >> > [ 3.346155] random: udevd: uninitialized urandom read (16 bytes = read, 29 bits of entropy available) >> > >> > [ 4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: = data=3Dordered >> > >> > [ 5.548283] random: dd: uninitialized urandom read (512 bytes = read, 43 bits of entropy available) >> > >> > INIT: Entering runlevel: 5 >> > >> > Configuring network interfaces... [ 5.820546] net eth0: = initializing cpsw version 1.12 (0) >> > >> > [ 5.825987] net eth0: initialized cpsw ale version 1.4 >> > >> > [ 5.831150] net eth0: ALE Table size 1024 >> > >> > [ 5.838581] net eth0: phy found : id is : 0x7c0f1 >> > >> > [ 5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready >> > >> > [ 9.896392] cpsw 4a100000.ethernet eth0: Link is Up - = 100Mbps/Full - flow control rx/tx >> > >> > [ 9.904635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes = ready >> > >> > chown: unrecognized option '--reference=3D/etc/resolv.conf' >> > >> > BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary. >> > >> > >> > >> > Usage: chown [-Rh]... USER[:[GRP]] FILE... >> > >> > chmod: unrecognized option '--reference=3D/etc/resolv.conf' >> > >> > BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary. >> > >> > >> > >> > Usage: chmod [-R] MODE[,MODE]... FILE... >> > >> > done. >> > >> > Starting system message bus: [ 14.887099] random: dbus-daemon: = uninitialized urandom read (12 bytes read, 62 bits of entropy available) >> > >> > [ 14.912318] random: dbus-daemon: uninitialized urandom read (12 = bytes read, 62 bits of entropy available) >> > >> > dbus. >> > >> > Starting OpenBSD Secure Shell server: sshd >> > >> > [ 15.393971] random: sshd: uninitialized urandom read (32 bytes = read, 65 bits of entropy available) >> > >> > done. >> > >> > Starting Xserver >> > >> > Starting DHCP server: >> > >> > . >> > >> > starting DNS forwarder and DHCP server: dnsmasq... >> > >> > X.Org X Server 1.19.6 >> > >> > Release Date: 2017-12-20 >> > >> > X Protocol Version 11, Revision 0 >> > >> > Build Operating System: Linux 4.15.0-38-generic x86_64 >> > >> > Current Operating System: Linux polycaptil-machine-am335x-evmsk >> > 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 armv7l >> > >> > Kernel command line: console=3DttyO0,115200 root=3D/dev/mmcblk0p3 = rw >> > >> > Build Date: 05 November 2018 09:33:21PM >> > >> > >> > >> > Current version of pixman: 0.34.0 >> > >> > Before reporting problems, check http://wiki.x.org >> > >> > to make sure that you have the latest version. >> > >> > Markers: (--) probed, (**) from config file, (=3D=3D) default = setting, >> > >> > (++) from command line, (!!) notice, (II) informational, >> > >> > (WW) warning, (EE) error, (NI) not implemented, (??) = unknown. >> > >> > (=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 1 20:08:02 = 2019 >> > >> > (=3D=3D) Using config file: "/etc/X11/xorg.conf" >> > >> > (=3D=3D) Using system config directory "/usr/share/X11/xorg.conf.d" >> > >> > done. >> > >> > Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf >> > >> > nl80211: 'nl80211' generic netlink not found >> > >> > Failed to initialize driver 'nl80211' >> > >> > wlan0: interface state UNINITIALIZED->DISABLED >> > >> > wlan0: AP-DISABLED >> > >> > hostapd_free_hapd_data: Interface wlan0 wasn't started >> > >> > Starting ntpd: done >> > >> > Starting syslogd/klogd: done >> > >> > Starting crond: OK >> > >> > >> > >> > Poky (Yocto Project Reference Distro) 2.5 >> > polycaptil-machine-am335x-evmsk /dev/ttyS0 >> > >> > >> > >> > polycaptil-machine-am335x-evmsk login: D-BUS per-session daemon >> > address is: >> > = unix:abstract=3D/tmp/dbus-07WuJSySeb,guid=3Da3e41f2692316c19766e95535c54a= 7 >> > 25 >> > >> > Size 1024x768 not found in available modes >> > >> > Error: No calibratable devices found. >> > >> > matchbox: Cant find a keycode for keysym 269025056 >> > >> > matchbox: ignoring key shortcut XF86Calendar=3D!$contacts >> > >> > >> > >> > matchbox: Cant find a keycode for keysym 2809 >> > >> > matchbox: ignoring key shortcut telephone=3D!$dates >> > >> > >> > >> > matchbox: Cant find a keycode for keysym 269025050 >> > >> > matchbox: ignoring key shortcut XF86Start=3D!matchbox-remote = -desktop >> > >> > >> > >> > dbus-daemon[358]: Activating service = name=3D'org.a11y.atspi.Registry' >> > requested by ':1.0' (uid=3D0 pid=3D354 comm=3D"matchbox-terminal ") >> > >> > dbus-daemon[358]: Successfully activated service = 'org.a11y.atspi.Registry' >> > >> > SpiRegistry daemon is running with well-known name - >> > org.a11y.atspi.Registry >> > >> > [ 30.662697] random: nonblocking pool is initialized >> > >> > >> > >> > Poky (Yocto Project Reference Distro) 2.5 >> > polycaptil-machine-am335x-evmsk /dev/ttyS0 >> > >> > >> > >> > Thank=E2=80=99s to take time to read my message. >> > >> > N.Stanisavljevic >> > >> > -- >> > _______________________________________________ >> > yocto mailing list >> > yocto@yoctoproject.org =20 >> > https://lists.yoctoproject.org/listinfo/yocto >> ------=_NextPart_000_000C_01D4C798.F7B9EAA0 Content-Type: text/html; charset="UTF-8" Content-Transfer-Encoding: quoted-printable

Thank you Zoran for = trying to help me.
I tried to resolve the problem, but I = didn=E2=80=99t succeed yet, I think I will to continue, and If after = some time I find nothing, I=E2=80=99m going to migrate to the thud = version.

 

I will maybe try to use = Bugzilla

 

Nikola

De : Zoran Stojsavljevic <zoran.stojsavljevic@gmail.com> =
Envoy=C3=A9 : mardi 5 f=C3=A9vrier 2019 = 19:28
=C3=80 : Stanisavljevic = <n.stanisavljevic@polycaptil.fr>
Cc : Yocto Project = <yocto@yoctoproject.org>; = marc.ferland@gmail.com
Objet : Re: [yocto] yocto = touchscreen

 

Hello Nikola,

Let us try to cut to = the chase!

After reading what Marc Ferland says/writes, and = looking into the following:
https://bu= gzilla.redhat.com/show_bug.cgi?id=3D1650634

I have spotted the = following:

Pat Riehecky 2018-11-20 14:28:22 UTC =

the bug remains with the elrepo = kernels:
kernel-ml-4.19.2-1.el7.elrepo.x86_64
kernel-lt-4.4.163-1.e= l7.elrepo.x86_64

I = never had this problem since I do not use Xorg (GFX), rather I = only

use serial console = from VBox VM from my BBB (pass-through).

 

Thus, = my suggestion for you, to skip the whole mess is to rebuild = your

distro in the light of YOCTO Project 2.6.1 (thud = 20.0.0.1).

 

My best = guess (then you'll inherit YOCTO kernel 4.20.x with fixed Xorg - = X11).

 

I = am using Fedora 29 on my laptop. Also from the = bugzilla:

Pat Riehecky 2018-11-20 15:46:11 UTC =

Bug resolved by rebuilding = xorg-x11-server-1.20.3-1.fc29 [1] for = 7.6.

With this in mind it appears to = be an Xorg server bug rather than = fbdev.

 

From my = HP EliteBook 840 G1 Fedora 29, Xorg.0.log - February 5th, = 2019.,

I have the = following:

 

[ =    26.955] Kernel command line: BOOT_IMAGE=3D/vmlinuz-4.20.6-200.fc29.x86_64

root=3D/dev/mapper/fedora-root ro rd.lvm.lv=3Dfedora/root rd.lvm.lv=3Dfedora/swap = rhgb

quiet = LANG=3Den_US.UTF-8

[   =  26.955] Build Date: 11 January 2019 =  12:47:38PM
[    = 26.955] Build ID: xorg-x11-server 1.20.3-3.fc29
[ =    26.955] Current version of pixman: 0.34.0

Best = Regards,
Zoran
_______

On Tue, Feb 5, 2019 at 2:49 PM Zoran = Stojsavljevic <zoran.stojsavljevic@gmail.c= om> wrote:
>
> Hello Nikola,
>
> > I = created a kernel recipe with a bbappend file, and, I added
> > = the same defconfig that I used for krogoth version.
> > The = bbappend for kernel recipe concern meta-ti layer.
> > I didn't = edited defconfig file in other layers which contain a
> > = kernel recipe.
>
> It could be some problem that Sumo does = not take your bbappend file into the
> consideration as = placed.
>
> It could be something else, as = well.
>
> I have the same issue with my defconfig file for = my Thud Beagle Bone Black (BBB)
> standard board. Every time I = recompile my YOCTO for it for different releases, I need
> to = import my specific defconfig. But I use complete different repos for my = standard
> Beagle Bone Black than YOCTO BBB Poky reference = distro.
>
> Here is what I use in Thud (my = bblayers.conf):
>
> POKY_BBLAYERS_CONF_VERSION =3D = "2"
> BBPATH =3D "${TOPDIR}"
> BBFILES = ?=3D ""
>
> BBLAYERS ?=3D " \
>   =   /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb = \
>     = /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-n= etworking \
>     = /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-o= e \
>     = /home/user/projects2/beaglebone-black/yocto-thud/meta-openembedded/meta-p= ython \
>     = /home/user/projects2/beaglebone-black/yocto-thud/meta-qt5 \
> =     /home/user/projects2/beaglebone-black/yocto-thud/poky/meta = \
>     = /home/user/projects2/beaglebone-black/yocto-thud/poky/meta-poky"
= >
> There, I replace defconfig in this layer: = /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb
> with = my own defconfig.
>
> In the directory:
> = /home/user/projects2/beaglebone-black/yocto-thud/meta-bbb/recipes-kernel/= linux/linux-stable-4.19/beaglebone
>
> If you use only Poky = repository, then you need to read the following paragraph (how to = use
> your defconfig with Poky):
>
> [2.3.3. Changing = the Configuration] YOCTO Project Linux Development Manual
> https://www.yoctoproject.org/docs/2.5/ke= rnel-dev/kernel-dev.html#using-an-in-tree-defconfig-file
> = 2.3.3. Changing the Configuration
>
> I hope this will help. = Please, keep us posted!
>
> Zoran
> = _______
>
>
> On Tue, Feb 5, 2019 at 10:54 AM = Stanisavljevic <n.stanisavljevic@polycapti= l.fr> wrote:
>>
>> Hy = Zoran
>>
>> Thank's to take time to = answer
>>
>> I created a kernel recipe with a bbappend = file, and, I added the same defconfig that I used for krogoth = version.
>> The bbappend for kernel recipe concern meta-ti = layer.
>> I didn't edited defconfig file in other layers which = contain a kernel recipe.
>>
>> I think it's a problem = which concern the screen resolution, screen frequency and adc = touchscreen.
>> Something is different between the krogoth and = sumo version, but I didn't find what is = changed...
>>
>> Xrandr show that problem is maybe = around the screen resolution.
>> It's show the next message : = "Size 1024x768 not found in available modes"
>> Maybe = it was changed between krogoth and sumo version...but I don't know where = it is indicated if sources files...
>>
>> What do you = think ? problem can be around the screen resolution, screen frequency = and adc touchscreen ?
>>
>> = Nikola
>>
>> -----Message d'origine-----
>> = De : Zoran Stojsavljevic <zoran.stojsavljevic@gmail.c= om>
>> Envoy=C3=A9 : lundi 4 f=C3=A9vrier 2019 = 17:08
>> =C3=80 : Stanisavljevic <n.stanisavljevic@polycapti= l.fr>
>> Cc : Yocto Project <yocto@yoctoproject.org>
= >> Objet : Re: [yocto] yocto touchscreen
>>
>> = > I built a first version of this os with version krogoth and it = works fine.
>> >
>> > Now I build a second = version of this os with version sumo and the
>> > touch = screen works fine during boot process but when kernel is = loaded,
>> > touchscreen freeze / lock and impossible to use = it.
>>
>> Did you compare Krogoth kernel defconfig = with Sumo kernel defconfig?
>>
>> May there are some = mismatches in drivers' setup between these two?
>>
>> = Zoran
>> _______
>>
>> On Mon, Feb 4, 2019 at = 12:24 PM Stanisavljevic <n.stanisavljevic@polycapti= l.fr> wrote:
>> >
>> > Hy = Team,
>> >
>> >
>> >
>> = > I have a problem
>> >
>> >
>> = >
>> > I buid a custom os for AM335x processor and I used = yocto to do it.
>> >
>> >
>> = >
>> > I build a first version of this os with version = krogoth and it work fine.
>> >
>> >
>> = >
>> > Now I build a second version of this os with = version sumo and the touchscreen work fine during boot process but when = kernel is loaded, touchscreen freeze / lock and impossible to use = it.
>> >
>> > The terminal is printed on the = touchscreen but the screen is locked, impossible to write a command or = to move the mouse to select, =E2=80=A6.
>> >
>> = >
>> >
>> > Here is the log of boot to the = user session (log got with serial communication between PC and board) = :
>> >
>> >
>> >
>> > = U-Boot SPL 2017.05-00001-g041a398 (May 02 2018 - 18:36:57)
>> = >
>> > Trying to boot from MMC1
>> = >
>> > reading uboot.env
>> >
>> = > reading u-boot.img
>> >
>> > reading = u-boot.img
>> >
>> > reading = u-boot.img
>> >
>> > reading = u-boot.img
>> >
>> >
>> = >
>> >
>> >
>> > U-Boot = 2017.05-00001-g041a398 (May 02 2018 - 18:36:57 +0200)
>> = >
>> >
>> >
>> > CPU  : = AM335X-GP rev 2.1
>> >
>> > Model: TI AM335x = EVM-SK
>> >
>> > DRAM:  256 MiB
>> = >
>> > NAND:  0 MiB
>> >
>> = > MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
>> = >
>> > reading uboot.env
>> >
>> = > ERROR: No USB device found
>> >
>> = >
>> >
>> > at = drivers/usb/gadget/ether.c:2709/usb_ether_init()
>> = >
>> > Net:   CACHE: Misaligned operation at range = [8df323c0, 8df32464]
>> >
>> >
>> = >
>> > Warning: ethernet@4a100000 using MAC address from = ROM
>> >
>> > eth0: = ethernet@4a100000
>> >
>> > Hit any key to stop = autoboot:  0
>> >
>> > reading = zImage
>> >
>> > 3412752 bytes read in 251 ms = (13 MiB/s)
>> >
>> > reading dtb
>> = >
>> > 39733 bytes read in 12 ms (3.2 MiB/s)
>> = >
>> > ## Flattened Device Tree blob at = 82000000
>> >
>> >    Booting using = the fdt blob at 0x82000000
>> >
>> >   =  Loading Device Tree to 8df19000, end 8df25b34 ... OK
>> = >
>> >
>> >
>> > Starting kernel = ...
>> >
>> >
>> >
>> > = [    0.000000] Booting Linux on physical CPU 0x0
>> = >
>> > [    0.000000] Initializing cgroup = subsys cpu
>> >
>> > [    0.000000] = Initializing cgroup subsys cpuacct
>> >
>> > [ =    0.000000] Linux version 4.4.19-ge581bb1cac = (polycaptil@polycaptil-HP-Notebook) (gcc version 5.3.0 (GCC) ) #1 = PREEMPT Thu May 24 11:42:17 CEST 2018
>> >
>> > = [    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 = (ARMv7), cr=3D10c5387d
>> >
>> > [   =  0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing = instruction cache
>> >
>> > [   =  0.000000] Machine model: TI AM335x EVM-SK
>> = >
>> > [    0.000000] cma: Reserved 48 MiB at = 0x8a800000
>> >
>> > [    0.000000] = Memory policy: Data cache writeback
>> >
>> > [ =    0.000000] CPU: All CPU(s) started in SVC mode.
>> = >
>> > [    0.000000] AM335X ES2.1 (sgx neon = )
>> >
>> > [    0.000000] Built 1 = zonelists in Zone order, mobility grouping on.  Total pages: = 64960
>> >
>> > [    0.000000] Kernel = command line: console=3DttyO0,115200 root=3D/dev/mmcblk0p3 = rw
>> >
>> > [    0.000000] PID hash = table entries: 1024 (order: 0, 4096 bytes)
>> >
>> = > [    0.000000] Dentry cache hash table entries: 32768 = (order: 5, 131072 bytes)
>> >
>> > [   =  0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 = bytes)
>> >
>> > [    0.000000] = Memory: 200444K/262144K available (6495K kernel code, 313K rwdata, 2368K = rodata, 260K init, 265K bss, 12548K reserved, 49152K cma-reserved, 0K = highmem)
>> >
>> > [    0.000000] = Virtual kernel memory layout:
>> >
>> > [   =  0.000000]     vector  : 0xffff0000 - 0xffff1000 =   (   4 kB)
>> >
>> > [   =  0.000000]     fixmap  : 0xffc00000 - 0xfff00000 =   (3072 kB)
>> >
>> > [   =  0.000000]     vmalloc : 0xd0800000 - 0xff800000   ( = 752 MB)
>> >
>> > [    0.000000] =     lowmem  : 0xc0000000 - 0xd0000000   ( 256 = MB)
>> >
>> > [    0.000000]   =   pkmap   : 0xbfe00000 - 0xc0000000   (   2 = MB)
>> >
>> > [    0.000000]   =   modules : 0xbf000000 - 0xbfe00000   (  14 = MB)
>> >
>> > [    0.000000]   =     .text : 0xc0008000 - 0xc08b0034   (8865 = kB)
>> >
>> > [    0.000000]   =     .init : 0xc08b1000 - 0xc08f2000   ( 260 = kB)
>> >
>> > [    0.000000]   =     .data : 0xc08f2000 - 0xc09407f0   ( 314 = kB)
>> >
>> > [    0.000000]   =      .bss : 0xc09407f0 - 0xc0982d58   ( 266 = kB)
>> >
>> > [    0.000000] SLUB: = HWalign=3D64, Order=3D0-3, MinObjects=3D0, CPUs=3D1, = Nodes=3D1
>> >
>> > [    0.000000] = Preemptible hierarchical RCU implementation.
>> = >
>> > [    0.000000]  Build-time = adjustment of leaf fanout to 32.
>> >
>> > [ =    0.000000] NR_IRQS:16 nr_irqs:16 16
>> = >
>> > [    0.000000] IRQ: Found an INTC at = 0xfa200000 (revision 5.0) with 128 interrupts
>> = >
>> > [    0.000000] OMAP clockevent source: = timer2 at 24000000 Hz
>> >
>> > [   =  0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps = every 89478484971ns
>> >
>> > [   =  0.000036] clocksource: timer1: mask: 0xffffffff max_cycles: = 0xffffffff, max_idle_ns: 79635851949 ns
>> >
>> = > [    0.000047] OMAP clocksource: timer1 at 24000000 = Hz
>> >
>> > [    0.000222] = clocksource_probe: no matching clocksources found
>> = >
>> > [    0.000415] Console: colour dummy = device 80x30
>> >
>> > [    0.000442] = WARNING: Your 'console=3DttyO0' has been replaced by 'ttyS0'
>> = >
>> > [    0.000448] This ensures that you = still see kernel messages. Please
>> >
>> > [ =    0.000454] update your kernel commandline.
>> = >
>> > [    0.000473] Calibrating delay loop... = 795.44 BogoMIPS (lpj=3D3977216)
>> >
>> > [ =    0.089064] pid_max: default: 32768 minimum: 301
>> = >
>> > [    0.089193] Mount-cache hash table = entries: 1024 (order: 0, 4096 bytes)
>> >
>> > [ =    0.089205] Mountpoint-cache hash table entries: 1024 (order: = 0, 4096 bytes)
>> >
>> > [   =  0.089932] Initializing cgroup subsys io
>> = >
>> > [    0.089964] Initializing cgroup = subsys memory
>> >
>> > [    0.090005] = Initializing cgroup subsys devices
>> >
>> > [ =    0.090021] Initializing cgroup subsys freezer
>> = >
>> > [    0.090036] Initializing cgroup = subsys perf_event
>> >
>> > [   =  0.090048] Initializing cgroup subsys pids
>> = >
>> > [    0.090078] CPU: Testing write buffer = coherency: ok
>> >
>> > [    0.090499] = Setting up static identity map for 0x80008200 - 0x80008258
>> = >
>> > [    0.092680] devtmpfs: = initialized
>> >
>> > [    0.105440] = VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev = 3
>> >
>> > [    0.120529] omap_hwmod: = debugss: _wait_target_disable failed
>> >
>> > [ =    0.175584] clocksource: jiffies: mask: 0xffffffff = max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
>> = >
>> > [    0.179852] pinctrl core: initialized = pinctrl subsystem
>> >
>> > [   =  0.181216] NET: Registered protocol family 16
>> = >
>> > [    0.183420] DMA: preallocated 256 KiB = pool for atomic coherent allocations
>> >
>> > [ =    0.209061] cpuidle: using governor ladder
>> = >
>> > [    0.239048] cpuidle: using governor = menu
>> >
>> > [    0.243661] OMAP = GPIO hardware version 0.1
>> >
>> > [   =  0.254360] hw-breakpoint: debug architecture 0x4 = unsupported.
>> >
>> > [    0.297629] = edma 49000000.edma: TI EDMA DMA engine driver
>> = >
>> > [    0.298606] reg-fixed-voltage = fixedregulator@2: could not find pctldev for node = /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_wl12xx_gpio, = deferring probe
>> >
>> > [   =  0.302364] omap_i2c 44e0b000.i2c: could not find pctldev for node = /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring = probe
>> >
>> > [    0.302525] media: = Linux media interface: v0.10
>> >
>> > [   =  0.302588] Linux video capture interface: v2.00
>> = >
>> > [    0.302638] pps_core: LinuxPPS API = ver. 1 registered
>> >
>> > [   =  0.302646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 = Rodolfo Giometti <giometti@linux.it>
>> = >
>> > [    0.302676] PTP clock support = registered
>> >
>> > [    0.302741] = EDAC MC: Ver: 3.0.0
>> >
>> > [   =  0.303966] omap-mailbox 480c8000.mailbox: omap mailbox rev = 0x400
>> >
>> > [    0.304332] = Advanced Linux Sound Architecture Driver Initialized.
>> = >
>> > [    0.305512] clocksource: Switched to = clocksource timer1
>> >
>> > [   =  0.316775] NET: Registered protocol family 2
>> = >
>> > [    0.317599] TCP established hash = table entries: 2048 (order: 1, 8192 bytes)
>> >
>> = > [    0.317636] TCP bind hash table entries: 2048 (order: = 1, 8192 bytes)
>> >
>> > [   =  0.317663] TCP: Hash tables configured (established 2048 bind = 2048)
>> >
>> > [    0.317748] UDP = hash table entries: 256 (order: 0, 4096 bytes)
>> = >
>> > [    0.317767] UDP-Lite hash table = entries: 256 (order: 0, 4096 bytes)
>> >
>> > [ =    0.317925] NET: Registered protocol family 1
>> = >
>> > [    0.318352] RPC: Registered named = UNIX socket transport module.
>> >
>> > [   =  0.318366] RPC: Registered udp transport module.
>> = >
>> > [    0.318372] RPC: Registered tcp = transport module.
>> >
>> > [   =  0.318379] RPC: Registered tcp NFSv4.1 backchannel transport = module.
>> >
>> > [    0.319330] hw = perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters = available
>> >
>> > [    0.321392] = futex hash table entries: 256 (order: -1, 3072 bytes)
>> = >
>> > [    0.329780] squashfs: version 4.0 = (2009/01/31) Phillip Lougher
>> >
>> > [   =  0.330717] NFS: Registering the id_resolver key type
>> = >
>> > [    0.330798] Key type id_resolver = registered
>> >
>> > [    0.330807] = Key type id_legacy registered
>> >
>> > [   =  0.330886] ntfs: driver 2.1.32 [Flags: R/O].
>> = >
>> > [    0.334673] Block layer SCSI generic = (bsg) driver version 0.4 loaded (major 248)
>> >
>> = > [    0.334706] io scheduler noop registered
>> = >
>> > [    0.334719] io scheduler deadline = registered
>> >
>> > [    0.334877] io = scheduler cfq registered (default)
>> >
>> > [ =    0.336555] pinctrl-single 44e10800.pinmux: 142 pins at pa = f9e10800 size 568
>> >
>> > [   =  0.339415] backlight supply power not found, using dummy = regulator
>> >
>> > [    0.402480] = Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
>> = >
>> > [    0.406962] 44e09000.serial: ttyS0 at = MMIO 0x44e09000 (irq =3D 158, base_baud =3D 3000000) is a = 8250
>> >
>> > [    1.017357] console = [ttyS0] enabled
>> >
>> > [   =  1.022206] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq =3D 159, = base_baud =3D 3000000) is a 8250
>> >
>> > [ =    1.032273] [drm] Initialized drm 1.1.0 20060810
>> = >
>> > [    1.039564] [drm] Supports vblank = timestamp caching Rev 2 (21.10.2013).
>> >
>> > = [    1.046349] [drm] No driver support for vblank timestamp = query.
>> >
>> > [    1.062121] = Console: switching to colour frame buffer device 60x34
>> = >
>> > [    1.070360] tilcdc 4830e000.lcdc: = fb0:  frame buffer device
>> >
>> > [ =    1.105531] [drm] Initialized tilcdc 1.0.0 20121205 on minor = 0
>> >
>> > [    1.118644] loop: = module loaded
>> >
>> > [    1.124253] = libphy: Fixed MDIO Bus: probed
>> >
>> > [ =    1.185550] davinci_mdio 4a101000.mdio: davinci mdio revision = 1.6
>> >
>> > [    1.191695] = davinci_mdio 4a101000.mdio: detected phy mask fffffffe
>> = >
>> > [    1.198786] libphy: 4a101000.mdio: = probed
>> >
>> > [    1.202886] = davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC = LAN8710/LAN8720
>> >
>> > [   =  1.212890] cpsw 4a100000.ethernet: Detected MACID =3D = a0:f6:fd:4c:a6:ba
>> >
>> > [   =  1.220531] cpsw 4a100000.ethernet: cpsw: Detected MACID =3D = c4:ed:ba:88:2a:92
>> >
>> > [   =  1.229382] mousedev: PS/2 mouse device common for all = mice
>> >
>> > [    1.235845] i2c /dev = entries driver
>> >
>> > [   =  1.240508] cpuidle: enable-method property 'ti,am3352' found = operations
>> >
>> > [    1.248197] = omap_hsmmc 48060000.mmc: Got CD GPIO
>> >
>> > [ =    1.275713] pinctrl-single 44e10800.pinmux: bad data for mux = pinmux_mmc2_pins
>> >
>> > [   =  1.282895] pinctrl-single 44e10800.pinmux: no pins entries for = pinmux_mmc2_pins
>> >
>> > [   =  1.317159] ledtrig-cpu: registered to indicate activity on = CPUs
>> >
>> > [    1.326069] NET: = Registered protocol family 10
>> >
>> > [   =  1.332092] sit: IPv6 over IPv4 tunneling driver
>> = >
>> > [    1.337715] NET: Registered protocol = family 17
>> >
>> > [    1.342510] Key = type dns_resolver registered
>> >
>> > [   =  1.347095] omap_voltage_late_init: Voltage driver support not = added
>> >
>> > [    1.407145] = tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as = rtc0
>> >
>> > [    1.415278] omap_i2c = 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
>> >
>> > = [    1.421665] omap_hsmmc 48060000.mmc: Got CD = GPIO
>> >
>> > [    1.426813] vmmc: = supplied by vbat
>> >
>> > [   =  1.466341] pinctrl-single 44e10800.pinmux: bad data for mux = pinmux_mmc2_pins
>> >
>> > [   =  1.474737] pinctrl-single 44e10800.pinmux: no pins entries for = pinmux_mmc2_pins
>> >
>> > [   =  1.513247] mmc0: host does not support reading read-only switch, = assuming write-enable
>> >
>> > [   =  1.523414] mmc0: new high speed SDHC card at address = 0001
>> >
>> > [    1.529635] mmcblk0: = mmc0:0001 AS 3.72 GiB
>> >
>> > [   =  1.535996]  mmcblk0: p1 p2 p3
>> >
>> = > [    1.595932] vdd_mpu: supplied by vbat
>> = >
>> > [    1.602167] input: gpio_buttons@0 as = /devices/platform/gpio_buttons@0/input/input0
>> = >
>> > [    1.618291] tps65910-rtc = tps65910-rtc: setting system clock to 2019-02-01 20:07:49 UTC = (1549051669)
>> >
>> > [    1.639394] = lis3_reg: disabling
>> >
>> > [   =  1.655732] ALSA device list:
>> >
>> > [ =    1.658720]   No soundcards found.
>> = >
>> > [    1.678290] EXT4-fs (mmcblk0p3): = couldn't mount as ext3 due to feature incompatibilities
>> = >
>> > [    1.696920] EXT4-fs (mmcblk0p3): = couldn't mount as ext2 due to feature incompatibilities
>> = >
>> > [    2.183999] EXT4-fs (mmcblk0p3): = recovery complete
>> >
>> > [   =  2.196864] EXT4-fs (mmcblk0p3): mounted filesystem with ordered = data mode. Opts: (null)
>> >
>> > [   =  2.205084] VFS: Mounted root (ext4 filesystem) on device = 179:3.
>> >
>> > [    2.225670] = devtmpfs: mounted
>> >
>> > [   =  2.235781] Freeing unused kernel memory: 260K (c08b1000 - = c08f2000)
>> >
>> > [    2.242162] = This architecture does not have kernel memory protection.
>> = >
>> > INIT: version 2.88 booting
>> = >
>> > Starting udev
>> >
>> > [ =    3.090091] udevd[78]: starting version 3.2.5
>> = >
>> > [    3.106175] random: udevd: = uninitialized urandom read (16 bytes read, 26 bits of entropy = available)
>> >
>> > [    3.118667] = random: udevd: uninitialized urandom read (16 bytes read, 26 bits of = entropy available)
>> >
>> > [   =  3.128014] random: udevd: uninitialized urandom read (16 bytes = read, 26 bits of entropy available)
>> >
>> > [ =    3.137335] random: udevd: uninitialized urandom read (16 = bytes read, 26 bits of entropy available)
>> >
>> = > [    3.218433] udevd[79]: starting = eudev-3.2.5
>> >
>> > [    3.325886] = random: udevd: uninitialized urandom read (16 bytes read, 29 bits of = entropy available)
>> >
>> > [   =  3.346155] random: udevd: uninitialized urandom read (16 bytes = read, 29 bits of entropy available)
>> >
>> > [ =    4.820708] EXT4-fs (mmcblk0p3): re-mounted. Opts: = data=3Dordered
>> >
>> > [   =  5.548283] random: dd: uninitialized urandom read (512 bytes read, = 43 bits of entropy available)
>> >
>> > INIT: = Entering runlevel: 5
>> >
>> > Configuring = network interfaces... [    5.820546] net eth0: initializing = cpsw version 1.12 (0)
>> >
>> > [   =  5.825987] net eth0: initialized cpsw ale version 1.4
>> = >
>> > [    5.831150] net eth0: ALE Table size = 1024
>> >
>> > [    5.838581] net = eth0: phy found : id is : 0x7c0f1
>> >
>> > [ =    5.851838] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not = ready
>> >
>> > [    9.896392] cpsw = 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control = rx/tx
>> >
>> > [    9.904635] IPv6: = ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>> = >
>> > chown: unrecognized option = '--reference=3D/etc/resolv.conf'
>> >
>> > = BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) multi-call binary.
>> = >
>> >
>> >
>> > Usage: chown = [-Rh]... USER[:[GRP]] FILE...
>> >
>> > chmod: = unrecognized option '--reference=3D/etc/resolv.conf'
>> = >
>> > BusyBox v1.27.2 (2018-11-05 21:16:09 UTC) = multi-call binary.
>> >
>> >
>> = >
>> > Usage: chmod [-R] MODE[,MODE]... = FILE...
>> >
>> > done.
>> = >
>> > Starting system message bus: [   14.887099] = random: dbus-daemon: uninitialized urandom read (12 bytes read, 62 bits = of entropy available)
>> >
>> > [   = 14.912318] random: dbus-daemon: uninitialized urandom read (12 bytes = read, 62 bits of entropy available)
>> >
>> > = dbus.
>> >
>> > Starting OpenBSD Secure Shell = server: sshd
>> >
>> > [   15.393971] = random: sshd: uninitialized urandom read (32 bytes read, 65 bits of = entropy available)
>> >
>> > done.
>> = >
>> > Starting Xserver
>> >
>> > = Starting DHCP server:
>> >
>> > .
>> = >
>> > starting DNS forwarder and DHCP server: = dnsmasq...
>> >
>> > X.Org X Server = 1.19.6
>> >
>> > Release Date: = 2017-12-20
>> >
>> > X Protocol Version 11, = Revision 0
>> >
>> > Build Operating System: = Linux 4.15.0-38-generic x86_64
>> >
>> > Current = Operating System: Linux polycaptil-machine-am335x-evmsk
>> > = 4.4.19-ge581bb1cac #1 PREEMPT Thu May 24 11:42:17 CEST 2018 = armv7l
>> >
>> > Kernel command line: = console=3DttyO0,115200 root=3D/dev/mmcblk0p3 rw
>> = >
>> > Build Date: 05 November 2018 =  09:33:21PM
>> >
>> >
>> = >
>> > Current version of pixman: 0.34.0
>> = >
>> >         Before reporting = problems, check http://wiki.x.org
>> = >
>> >         to make sure that you = have the latest version.
>> >
>> > Markers: (--) = probed, (**) from config file, (=3D=3D) default setting,
>> = >
>> >         (++) from command = line, (!!) notice, (II) informational,
>> >
>> > =         (WW) warning, (EE) error, (NI) not = implemented, (??) unknown.
>> >
>> > (=3D=3D) = Log file: "/var/log/Xorg.0.log", Time: Fri Feb  1 = 20:08:02 2019
>> >
>> > (=3D=3D) Using config = file: "/etc/X11/xorg.conf"
>> >
>> > = (=3D=3D) Using system config directory = "/usr/share/X11/xorg.conf.d"
>> >
>> > = done.
>> >
>> > Starting HOSTAP Daemon: = Configuration file: /etc/hostapd.conf
>> >
>> > = nl80211: 'nl80211' generic netlink not found
>> = >
>> > Failed to initialize driver 'nl80211'
>> = >
>> > wlan0: interface state = UNINITIALIZED->DISABLED
>> >
>> > wlan0: = AP-DISABLED
>> >
>> > hostapd_free_hapd_data: = Interface wlan0 wasn't started
>> >
>> > = Starting ntpd: done
>> >
>> > Starting = syslogd/klogd: done
>> >
>> > Starting crond: = OK
>> >
>> >
>> >
>> > = Poky (Yocto Project Reference Distro) 2.5
>> > = polycaptil-machine-am335x-evmsk /dev/ttyS0
>> >
>> = >
>> >
>> > polycaptil-machine-am335x-evmsk = login: D-BUS per-session daemon
>> > address is:
>> = > = unix:abstract=3D/tmp/dbus-07WuJSySeb,guid=3Da3e41f2692316c19766e95535c54a= 7
>> > 25
>> >
>> > Size 1024x768 = not found in available modes
>> >
>> > Error: No = calibratable devices found.
>> >
>> > matchbox: = Cant find a keycode for keysym 269025056
>> >
>> = > matchbox: ignoring key shortcut = XF86Calendar=3D!$contacts
>> >
>> >
>> = >
>> > matchbox: Cant find a keycode for keysym = 2809
>> >
>> > matchbox: ignoring key shortcut = telephone=3D!$dates
>> >
>> >
>> = >
>> > matchbox: Cant find a keycode for keysym = 269025050
>> >
>> > matchbox: ignoring key = shortcut XF86Start=3D!matchbox-remote -desktop
>> = >
>> >
>> >
>> > = dbus-daemon[358]: Activating service = name=3D'org.a11y.atspi.Registry'
>> > requested by ':1.0' = (uid=3D0 pid=3D354 comm=3D"matchbox-terminal ")
>> = >
>> > dbus-daemon[358]: Successfully activated service = 'org.a11y.atspi.Registry'
>> >
>> > SpiRegistry = daemon is running with well-known name -
>> > = org.a11y.atspi.Registry
>> >
>> > [   = 30.662697] random: nonblocking pool is initialized
>> = >
>> >
>> >
>> > Poky (Yocto = Project Reference Distro) 2.5
>> > = polycaptil-machine-am335x-evmsk /dev/ttyS0
>> >
>> = >
>> >
>> > Thank=E2=80=99s to take time to = read my message.
>> >
>> > = N.Stanisavljevic
>> >
>> > --
>> > = _______________________________________________
>> > yocto = mailing list
>> > yocto@yoctoproject.org
>= > > https://lists.yoct= oproject.org/listinfo/yocto
>>

------=_NextPart_000_000C_01D4C798.F7B9EAA0--