Return-path: Received: from helios.cedo.cz ([193.165.198.226] helo=postak.cedo.cz) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1Kwc7d-0005QP-Dv for linux-dvb@linuxtv.org; Sun, 02 Nov 2008 13:32:04 +0100 Received: from pixle (pixle.cedo.cz [193.165.198.235]) by postak.cedo.cz (Postfix) with SMTP id AA3AC225749 for ; Sun, 2 Nov 2008 13:31:26 +0100 (CET) Message-ID: <001101c93ce7$23bcfdb0$7f79a8c0@tommy> From: "Tomas Drajsajtl" To: Date: Sun, 2 Nov 2008 13:32:58 +0100 MIME-Version: 1.0 Subject: [linux-dvb] Any DVB-C tuner with working CAM? List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Hello, I have bought and tested two DVB-C cards which are supported according to http://www.linuxtv.org/wiki/index.php/DVB-C_PCI_Cards Both are perfectly working with FTA but none with the CAM. 1. TechnoTrend Premium DVB-C 2300 DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-CA rev1.X) adapter has MAC addr = .... dvb-ttpci: gpioirq unknown type=0 len=0 dvb-ttpci: info @ card 3: firm f0240009, rtsl b0250018, vid 71010068, app 80002622 dvb-ttpci: firmware @ card 3 supports CI link layer interface dvb-ttpci: DVB-C analog module @ card 3 detected, initializing MSP3415 dvb_ttpci: saa7113 not accessible. saa7146_vv: saa7146 (0): registered device video2 [v4l2] saa7146_vv: saa7146 (0): registered device vbi2 [v4l2] DVB: registering frontend 3 (ST STV0297 DVB-C)... Applications detect the inserted CAM even if the CAM is not inserted ;-) but even when it is, no scrambled channel is decrypted. 2. Technisat CableStar HD2 found a VP-2040 PCI DVB-C device on (01:02.0), Mantis Rev 1 [1ae4:0002], irq: 18, latency: 64 memory: 0xefeff000, mmio: 0xffffc20000aee000 MAC Address=[....] mantis_alloc_buffers (0): DMA=0x7d820000 cpu=0xffff81007d820000 size=65536 mantis_alloc_buffers (0): RISC=0x7e50e000 cpu=0xffff81007e50e000 size=1000 DVB: registering new adapter (Mantis dvb adapter) It says that an unsupported CAM is inserted. :-( Then I found in this mailing list that the mantis CI-CAM support is not finalized yet. I appreciate the work that Manu does with the mantis driver and I trust that it will be supported in the comming months but I would expect that the Wiki page mentioned above will have also the information about not yet supported CI! :-( So I have the CAM, two DVB-C cards but can't watch the channels I pay every month... I spent many days with Google to find out a working solution with these two or another card but unsuccessfully. Can somebody please advice me a DVB-C card with CI which _is on market_ and does work with Technisat Conax CAM? Thanks in advance, Tomas _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb