From: Wolfgang Haeuptli To: linuxppc-dev@lists.linuxppc.org Subject: Re: Need testers with MESH SCSI Date: Fri, 22 Dec 2000 17:00:28 -0500 Content-Type: text/plain References: <200012220559.XAA11090@lists.linuxppc.org> In-Reply-To: <200012220559.XAA11090@lists.linuxppc.org> MIME-Version: 1.0 Message-Id: <00122217123800.00661@lobo.localnet> Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Well, would have been a nice christmas present... BUT STILL: (after applying the new mesh_init() to scsi/mesh.c) mesh: target 6 aborted which means that my UMAX Astra 1200S Scanner still does not work under linuxppc... My System: Performa 6400, Kernel 2.2.15pre19 (a couple of months ago I found a message on the list how to enable scsi-debugging/logging, which magically made the scanner work -- slow and lots of debugs in log/messages. There must be a better way...) Greetings Wolfgang Haeuptli ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/