From: "Cristiano Soares" Date: Tue, 04 May 2004 19:32:37 +0000 Subject: [LARTC] shape outgoing/upload traffic PER-IP. Message-Id: <001701c4320e$8f5f1280$bd01a8c0@stillnicks> MIME-Version: 1 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0014_01C431F5.697DFEF0" List-Id: To: lartc@vger.kernel.org This is a multi-part message in MIME format. ------=_NextPart_000_0014_01C431F5.697DFEF0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable does anyone know a way to shape outgoing/upload traffic per ip? I have a network and i want to limit the upload with 100kbit per user. = Ex: 192.168.1.20 ----> 1024kbit-DOWN / 100kbit-UP 192.168.1.21 ----> 1024kbit-DOWN / 100kbit-UP and so on....... Ive tried CBQ and HTB, but couldnt get is right. the only thing that I = did in upload bases was:=20 "tc qdisc add dev ppp0 root tbf rate 220kbit latency 50ms burst 1540" witch is for the whole interface. not for a simple IP. Thanks a lot. Cristiano Soares ------=_NextPart_000_0014_01C431F5.697DFEF0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
does anyone know a way to shape = outgoing/upload=20 traffic per ip?
 
I have a network and i want to limit = the=20 upload with 100kbit per user. Ex:
 
192.168.1.20 ----> 1024kbit-DOWN /=20 100kbit-UP
192.168.1.21 ----> 1024kbit-DOWN /=20 100kbit-UP
and so on.......
 
 
Ive tried CBQ and HTB, but couldnt get = is right.=20 the only thing that I did in upload bases was:
"tc qdisc add dev ppp0 root tbf rate 220kbit = latency 50ms=20 burst 1540"
 
witch is for the whole interface. not for a = simple=20 IP.
 
 
Thanks a lot.
 
Cristiano Soares
 
------=_NextPart_000_0014_01C431F5.697DFEF0-- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/