From: "Victor Yeo" Date: Mon, 09 May 2005 05:34:14 +0000 Subject: Re: [LARTC] pfifo_fast error message Message-Id: <001801c55520$ac1ccc10$2604a8c0@ndchunk> List-Id: References: <023501c552e6$fc01a890$2604a8c0@ndchunk> In-Reply-To: <023501c552e6$fc01a890$2604a8c0@ndchunk> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org the problem is after i delete the qdisc, and check again, there is nothing being displayed. Is this correct? #tc qdisc del root dev eth0 #tc qdisc show dev eth0 ----- Original Message ----- From: "Marcin Ka?u?a" To: Cc: "Victor Yeo" Sent: Monday, May 09, 2005 12:45 AM Subject: Re: [LARTC] pfifo_fast error message > What for? I'ts already there - it's the default qdisc when there's no other > assigned. So to set eth0 qdisc to pfifo_fast you just need to (as root of > course) > #tc qdisc del root dev eth0 > > check with > #tc qdisc show dev eth0 > > Martin > > On Saturday 07 May 2005 11:27, Victor Yeo wrote: > > good afternoon, > > > > I am a newbie to tc. > > > > i want to set qdisc to pfifo_fast, using the command below: > > % tc qdisc add dev eth0 root pfifo_fast > > RTNETLINK answers: Invalid argument > > > > why am i getting this error message? > > > > thanx. > > > > victor > > > > > > _______________________________________________ > > LARTC mailing list > > LARTC@mailman.ds9a.nl > > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc