From: "Vladimir Ichkov" Date: Tue, 13 Apr 2004 21:14:53 +0000 Subject: [LARTC] system requirements Message-Id: <001a01c4219c$67cc6600$a95c4fd9@cross> MIME-Version: 1 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0015_01C421B5.827CA320" List-Id: To: lartc@vger.kernel.org This is a multi-part message in MIME format. ------=_NextPart_000_0015_01C421B5.827CA320 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi, I have the following problem with cbq.init script. I try to limit the output traffic from all my 254 IPs to 4Kb/s, but when I start the script the ping time from one of the shaped hosts drastically increases. 0,2-0,7 milisecs without shaper and 1500-2000 milisecs with. I though it might be the low CPU power or something. I'm running on 500MHz Intel Celeron. Anyone have experienced a similar problem? Here is the entry file I use for one of the IPs: DEVICE=3Deth1,10Mbit,1Mbit RATE=3D40Kbit WEIGHT=3D4Kbit PRIO=3D5 RULE=3D213.169.58.111, where eth1 is the internet interface. ------=_NextPart_000_0015_01C421B5.827CA320 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi,
I have the following problem with = cbq.init=20 script.
I try to limit the output traffic from = all my 254=20 IPs to 4Kb/s,
but when I start the script the ping = time from one=20 of the
shaped hosts drastically = increases.
0,2-0,7 milisecs without shaper and = 1500-2000=20 milisecs with.
I though it might be the low CPU power = or=20 something.
I'm running on 500MHz Intel Celeron. = Anyone=20 have
experienced a similar = problem?
Here is the entry file I use for one of = the=20 IPs:
 
DEVICE=3Deth1,10Mbit,1Mbit
RATE=3D40Kbit
WEIGHT=3D4KbitPRIO=3D5
RULE=3D213.169.58.111,
where eth1 is the internet=20 interface.
------=_NextPart_000_0015_01C421B5.827CA320-- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/