Message-ID: <001b01bf3c16$21b32980$7b0c86c0@ined.fr> From: "Nicolas Brouard" References: <199910181655.AA11114@mailgate1b.telekom.de> Subject: [linux-lvm] Gated and Re: FAQ Question not found Date: Wed, 1 Dec 1999 17:07:04 +0100 MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Sender: owner-linux-lvm Errors-To: owner-linux-lvm List-Id: Content-Type: text/plain; charset="iso-8859-1" To: Heinz Mauelshagen Cc: mge@ts1.ez-darmstadt.telekom.de, linux-lvm@msede.com Thanks a lot to people having answer my naive question : experimenting = LVM on a laptop with only one physical hard disk. I haven't had the opportunity to test LVM with my new 6.4Gb (Toshiba) on = my Dell Xpi 133MHZ laptop. The reason is that I got problems with this disk during a fdisk action: = I partitionned the disk with one primary partition for Windows98 and an = extended partition for the rest of the disk. I used WIndows fdisk for = creating windows primary and extended partitions and used Linux fdisk to = create linux partitions within the extended partitions. The problem I = got is that the controller of the disk tried to read, apparently, wrong = sectors, and started to make noise and bangs. I stopped the computer and = rebooted with the already defined partitions (Windows and linux) and it = worked. But when I tried to use fdisk on windows to create other = partitions like D: for windows, it started again to bang and this time = it was fatal. The disk was no more recognized at boot time (it is not a = MBR problem but a hardware problem) and I am waiting for a new disk from = the constructor even if I don't know the reason for the break. So, I = haven't had time to play with LVM with this disk! Concurrently I also upgraded my desktop, a Dell XPs 166 MHZ, from 2.6 GB = to 8.4 GB. I downloaded the new bios and the sytem was now able to = recognize the disk in auto mode. I have been able to setup again Windows = and Linux (using xcopy32 for Windows and a simple tar for Linux) by = copying the old disk on the new one (on a desktop we have place for two = disks, not on a laptop).=20 Everything was fine. But looking at the WEB on how to do easier = partitionning, I founded "Partition magic" (on WIndows) which is = commercial and "parted" on Linux which is free but still experimental. = I installed parted on linux. But unfortunately, parted told me that the = real size of my new disk did not correspond to what was written in the = master boot record. In fact gated was correct, the Dell Bios (even if = updated) did a wrong translation address and I was losing 500 Mb.=20 I lacked of courage to force the Dell bios to work with fixed Cylinder = Head (I am under but close to the 8.4 GB limit) and to reformat all the = Windows and Linux partitions and to reimplement everything. So, now I have a working system but I am not able to play with = partitions and to implement LVM. But I discovered the existence of = "gated", even if I haven't been able to experiment it.=20 And here is my question: Is "gated" a serious alternative to LVM? I am not trying to add "online" = a new disk and, still online, remove the old one, with a nice LVM which = tranparently copies the old disk to the new one. That kind of operation = was possible on AIX LVM. But I am simply trying to find a tool which = increases progressively the size of my different partitions according to = my changing needs. "Gated" seemed to do the job. Any remark on gated? Nicolas Brouard brouard@ined.fr =20 ----- Message d'origine -----=20 De : Heinz Mauelshagen =C0 : Cc : ; Envoy=E9 : lundi 18 octobre 1999 19:54 Objet : Re: [linux-lvm] FAQ Question not found Hi Nicolaus. >=20 > I have used and appreciated LVM on AIX for years. The main use for me > consisted in having initially a hard disk too big for my actual but > increasing needs. > It was very nice to increase a filesystem like /home /usr/local or = /var when > mail traffic increased. > Now I have a similar need. I am using a laptop with 2Gb. I bought a = 6Gb hard > disk which should replace the old one. I would like to have at the = beginning > 2Gb for Win98 and some initially small logical volumes for a Linux = system. > With my 2Gb old disk, I used 1Gb for Windows and 1Gb for Linux. >=20 > Is it a good idea to try to implement LVM for the linux partition? Yes 8*) > How does it deal with other partitions and the limitation to 4 primary = partitions. Regular and LVM used partitions can coexist on the same disk(s). > How to begin? Should I first install Linux with arbitrary partitions, = and > then build a LVM kernel and then? I do only have one physical disk and = can't > play so much with other partitions. Yes, install a basic root only system which doesn't eat to much of your = space, install LVM, setup VG(s) and LVs (for /usr, /opt etc), build = filesystems, mount them and transfer data from your small root fs to the = corresponding LVM based filesystems, change /etc/fstab, put vgscan and "vgchange -ay" into = your system startup script (for eg. /sbin/init.d/boot for SuSE) before ext2 = mounts and reboot. Install additional packages. >=20 > In fact I do not understand how it works. On AIX, all the disk was = managed > with LVM? With Linus LVM you are free to manage some disks/partitions or all. > Here, can I decide that logical volume manager will only deal with > a big ext2 partition. And within this partition I would be able to = have > variable sized /var /home / ? No, no ext2 partition. In fact you can use loop devices for evaluation = purposes. But this is _not_ recommended for production systems. Use disk partitions, mutliple devices or total disks instead. In pratice only having 1 disk in the first place, use at least 1 = partition, set the partition identifier to 0xfe with fdisk, do a "pvcreate /dev/YourPartition", "vgcreate YourVG /dev/YourPartition" and some lvcreate(s). For further command information, please have a = look at the corresponding manuals. >=20 > I would appreciate any help, even if it is: Ok, do fixed partitions = and not > LVM! >=20 Regards, Heinz Please look into lvm(8) and LVM-HOWTO for additional information. -- =3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D= -=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-= =3D-=3D- Systemmanagement CS-TS T-Nova Entwicklungszentrum = Darmstadt Heinz Mauelshagen Otto-Roehm-Strasse 71c Senior Systems Engineer Postfach 10 05 41 64205 Darmstadt mge@ez-darmstadt.telekom.de Germany +49 6151 886-425 FAX-386 =3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D= -=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-= =3D-=3D-