From: Dimitar Penev Date: Mon, 3 Nov 2008 10:40:37 +0200 Subject: [U-Boot] MT29F8G08MAAWC support in u-boot Message-ID: <001d01c93d8f$d84359c0$2901a8c0@dpn> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Guys, Our Blackfin based system was successfully using MT29F2G08AABWP NAND flash and u-boot. Recently due to the limited availability we decided to migrate to the new nand chips from Micron MT29F8G08MAAWC It uses new technology Multi-Level Cell However we are still not able to make it working. The capacity, bus width, etc are stored in the flash itself. The u-boot's nand driver however reads the chip ID and recognize this chip as 16 bit wide though from the partnumber it is clear that it is 8 bit device. Is there someone which know what we need to look at so we make those new chips from Micron working with u-boot nand driver. Thank you for your time! Dimitar