From: "Mark Ryan" Date: Fri, 30 Jan 2004 00:03:55 +0000 Subject: Re: [LARTC] wonder shaper problems Message-Id: <001e01c3e6c4$8e942d80$6501a8c0@underworld> List-Id: References: <001c01c3e615$9f02ac00$6501a8c0@underworld> In-Reply-To: <001c01c3e615$9f02ac00$6501a8c0@underworld> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org That is what i was afraid of. I have no idea how to re-compile the QoS modules into the Xandros kernel. Mark ----- Original Message ----- From: "Damion de Soto" To: "Mark Ryan" Cc: Sent: Thursday, January 29, 2004 6:44 PM Subject: Re: [LARTC] wonder shaper problems > Hi Mark > > > > I went to console and started the wondershaper script...and i get the > > following error messages. > > > > RTNETLINK answers: Invalid Argument > > > > many times. > > Any ideas what is wrong? > > Take a look at the archives over the last week or so. > This generic question has been raised a few times just recently. > > > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > > (basically, you're missing kernel modules/config) > > -- > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Damion de Soto - Software Engineer email: damion@snapgear.com > SnapGear - A CyberGuard Company --- ph: +61 7 3435 2809 > | Custom Embedded Solutions fax: +61 7 3891 3630 > | and Security Appliances web: http://www.snapgear.com > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > --- Free Embedded Linux Distro at http://www.snapgear.org --- > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/