Return-path: Received: from mail78-59.sinamail.sina.com.cn ([219.142.78.59]) by bombadil.infradead.org with smtp (Exim 4.89 #1 (Red Hat Linux)) id 1eZsbH-0000FE-IF for ath10k@lists.infradead.org; Fri, 12 Jan 2018 06:14:02 +0000 From: "gary" Subject: ath10k firmware creashed in mesh with security mode Date: Fri, 12 Jan 2018 14:13:41 +0800 Message-ID: <002201d38b6c$7ed5b560$7c812020$@sina.com> MIME-Version: 1.0 Content-Language: zh-cn List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: ath10k@lists.infradead.org Hi all, I want to demo mesh feature on QCA9984. When I setup an open mesh link between two access points, the mesh link works well. But when I setup an secure mesh link, the mesh link can be setup, but it fail to ping each other because of firmware crash. Any comment is appreciated. Here are the wpa_supplicant config and the console log. ctrl_interface=/var/run/wpa_supplicant_0 user_mpm=1 network={ ssid="Gary_mesh" key_mgmt=SAE mode=5 frequency=5180 psk="password" ieee80211w=1 } PING 192.168.2.11 (192.168.2.11): 56 data bytes ath10k_pci 0001:02:00.0: firmware crashed! (guid feda2a61-1dd4-49d7-813c-d5b163d14fb4) ath10k_pci 0001:02:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe ath10k_pci 0001:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 1 testmode 1 ath10k_pci 0001:02:00.0: firmware ver 10.4-3.4-00082 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 f301de65 ath10k_pci 0001:02:00.0: board_file api 2 bmi_id 0:3 crc32 4de21199 ath10k_pci 0001:02:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 ath10k_pci 0001:02:00.0: firmware register dump: ath10k_pci 0001:02:00.0: [00]: 0x0000000A 0x000015B3 0x009A7E11 0x00975B31 ath10k_pci 0001:02:00.0: [04]: 0x009A7E11 0x00060F30 0x00000005 0x00000013 ath10k_pci 0001:02:00.0: [08]: 0x0045E7D4 0x0045F078 0x00460374 0x00406734 ath10k_pci 0001:02:00.0: [12]: 0x00000009 0x00000000 0x009A764C 0x009A7673 ath10k_pci 0001:02:00.0: [16]: 0x009A7E11 0x009A77CA 0x009606CA 0x00000000 ath10k_pci 0001:02:00.0: [20]: 0x409A7E11 0x0040662C 0x004067F0 0x00012474 ath10k_pci 0001:02:00.0: [24]: 0x809A9487 0x0040668C 0x004066E8 0xC09A7E11 ath10k_pci 0001:02:00.0: [28]: 0x809AA2E2 0x0040671C 0x004067F0 0x00012474 ath10k_pci 0001:02:00.0: [32]: 0x80987EB1 0x004067EC 0x0045E7D4 0x004551E4 ath10k_pci 0001:02:00.0: [36]: 0x8099657F 0x0040685C 0x0042F558 0x0045A078 ath10k_pci 0001:02:00.0: [40]: 0x80991660 0x0040687C 0x0042F558 0x0045A078 ath10k_pci 0001:02:00.0: [44]: 0x80963AD3 0x00406A7C 0x0042F558 0x00991658 ath10k_pci 0001:02:00.0: [48]: 0x80960E80 0x00406A9C 0x0000001F 0x00400000 ath10k_pci 0001:02:00.0: [52]: 0x80960E51 0x00406ACC 0x00400000 0x00000000 ath10k_pci 0001:02:00.0: [56]: 0x80960E9D 0x00406AEC 0x00000000 0x00400600 ath10k_pci 0001:02:00.0: Copy Engine register dump: ath10k_pci 0001:02:00.0: [00]: 0x0004a000 4 4 3 3 ath10k_pci 0001:02:00.0: [01]: 0x0004a400 10 10 109 110 ath10k_pci 0001:02:00.0: [02]: 0x0004a800 40 40 39 40 ath10k_pci 0001:02:00.0: [03]: 0x0004ac00 20 20 22 20 ath10k_pci 0001:02:00.0: [04]: 0x0004b000 34 34 63 23 ath10k_pci 0001:02:00.0: [05]: 0x0004b400 30 30 413 414 ath10k_pci 0001:02:00.0: [06]: 0x0004b800 16 16 16 16 ath10k_pci 0001:02:00.0: [07]: 0x0004bc00 1 1 1 1 ath10k_pci 0001:02:00.0: [08]: 0x0004c000 0 0 127 0 ath10k_pci 0001:02:00.0: [09]: 0x0004c400 0 0 0 0 ath10k_pci 0001:02:00.0: [10]: 0x0004c800 0 0 0 0 ath10k_pci 0001:02:00.0: [11]: 0x0004cc00 0 0 0 0 ath10k_pci 0001:02:00.0: firmware crashed! (guid 6460bed0-61f1-4e95-a469-dd7fce5cb21f) ath10k_pci 0001:02:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe ath10k_pci 0001:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 1 testmode 1 ath10k_pci 0001:02:00.0: firmware ver 10.4-3.4-00082 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 f301de65 ath10k_pci 0001:02:00.0: board_file api 2 bmi_id 0:3 crc32 4de21199 ath10k_pci 0001:02:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1 ath10k_pci 0001:02:00.0: failed to get memcpy hi address for firmware address 4: -16 ath10k_pci 0001:02:00.0: failed to read firmware dump area: -16 ath10k_pci 0001:02:00.0: Copy Engine register dump: ath10k_pci 0001:02:00.0: [00]: 0x0004a000 0 0 0 0 ath10k_pci 0001:02:00.0: [01]: 0x0004a400 0 0 0 0 ath10k_pci 0001:02:00.0: [02]: 0x0004a800 0 0 0 0 ath10k_pci 0001:02:00.0: [03]: 0x0004ac00 0 0 0 0 ath10k_pci 0001:02:00.0: [04]: 0x0004b000 0 0 0 0 ath10k_pci 0001:02:00.0: [05]: 0x0004b400 0 0 0 0 ath10k_pci 0001:02:00.0: [06]: 0x0004b800 0 0 0 0 ath10k_pci 0001:02:00.0: [07]: 0x0004bc00 1 0 1 0 ath10k_pci 0001:02:00.0: [08]: 0x0004c000 0 0 0 0 ath10k_pci 0001:02:00.0: [09]: 0x0004c400 0 0 0 0 ath10k_pci 0001:02:00.0: [10]: 0x0004c800 0 0 0 0 ath10k_pci 0001:02:00.0: [11]: 0x0004cc00 0 0 0 0 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k