From: "XMundo - Soporte Tecnico" Date: Sun, 01 Aug 2004 05:20:14 +0000 Subject: [LARTC] QOS Message-Id: <002601c47787$4769c1a0$fd01000a@estacion1> MIME-Version: 1 Content-Type: multipart/mixed; boundary="----=_NextPart_000_000F_01C4776E.141F73D0" List-Id: References: In-Reply-To: To: lartc@vger.kernel.org This is a multi-part message in MIME format. ------=_NextPart_000_000F_01C4776E.141F73D0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi. I=B4m making an script for load balancing of two cablemodems internet connections toward my LAN. The problem is that when I try to 'equalize' the the two internet connections with the weight=3D1 it doesn=B4t work. On the other hand, if I put 5 and 5 it works, but not at 100%, it does intermittlently, some times works and others don=B4t. example: ip route add default equalize\ nexthop via $P1 dev $IF1 weight 5\ nexthop via $P2 dev $IF2 weight 5 Besides, when I open, for example, the firefox browser, it takes a lot to start navigating, sometimes it works and other times gives an error and I can=B4t navigate. From the server it works properly, but form the clients PCs doesn=B4t. By the way, I=B4m making NAT toward the Client PCs. Do you have any idea why does it take so long to start navigating and why sometimes it works and sometimes doesn=B4t. This is the current script running in my server: #=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= P0_NET=3D10.0.1.0/24 IF0=3Deth1 IP0=3D10.0.1.1 IF1=3Deth0 IP1=3Dxxx.xxx.xxx.7 P1_NET=3Dxxx.xxx.xxx.0/24 P1=3Dxxx.xxx.xxx.1 IF2=3Deth2 IP2=3Dyyy.yyy.yyy.21 P2_NET=3Dyyy.yyy.yyy.0/24 P2=3Dyyy.yyy.yyy.1 echo 0 > /proc/sys/net/ipv4/conf/eth0/rp_filter echo 0 > /proc/sys/net/ipv4/conf/eth2/rp_filter echo 3 > /proc/sys/net/ipv4/route/gc_elasticity echo 1 > /proc/sys/net/ipv4/route/gc_interval echo 0 > /proc/sys/net/ipv4/route/gc_timeout ip route flush cache ip route flush all ip route flush table modem0 ip route flush table modem1 ip rule add from $IP1 lookup modem0 ip rule add from $IP2 lookup modem1 ip route add $P1_NET dev $IF1 src $IP1 ip route add $P2_NET dev $IF2 src $IP2 ip route add $P0_NET dev $IF0 src $IP0 ip rule add from $P1_NET lookup modem0 ip route add $P0_NET dev $IF0 table modem0 ip route add 0/0 via $P1 table modem0 ip rule add from $P2_NET lookup modem1 ip route add $P0_NET dev $IF0 table modem1 ip route add 0/0 via $P2 table modem1 ip route add default equalize\ nexthop via $P1 dev $IF1 weight 5\ nexthop via $P2 dev $IF2 weight 5 #=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= ------=_NextPart_000_000F_01C4776E.141F73D0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi.

I=B4m making an script for load = balancing of=20 two
cablemodems internet connections toward my LAN.

The = problem is=20 that when I try to 'equalize' the
the two internet connections with = the=20 weight=3D1 it
doesn=B4t work. On the other hand, if I put 5 and = 5
it works,=20 but not at 100%, it does intermittlently,
some times works and others = don=B4t.

example:

ip route add default = equalize\
 nexthop=20 via $P1 dev $IF1 weight 5\
 nexthop via $P2 dev $IF2 weight=20 5

Besides, when I open, for example, the firefox browser, = it
takes a=20 lot to start navigating, sometimes it works and other
times gives an = error=20 and I can=B4t navigate.

>From the server it works properly, = but form the=20 clients PCs
doesn=B4t.

By the way, I=B4m making NAT toward the = Client=20 PCs.

Do you have any idea why does it take so long to = start
navigating=20 and why sometimes it works and sometimes doesn=B4t.


This is = the current=20 script running in my=20 server:


#=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D

P0_NET=3D10.0.1.0/24
IF0=3Deth1
IP0=3D10.= 0.1.1

IF1=3Deth0
IP1=3Dxxx.xxx.xxx.7
P1_NET=3Dxxx.xxx.xxx.0/= 24
P1=3Dxxx.xxx.xxx.1

IF2=3Deth2
IP2=3Dyyy.yyy.yyy.21
P2_= NET=3Dyyy.yyy.yyy.0/24
P2=3Dyyy.yyy.yyy.1

echo=20 0 > /proc/sys/net/ipv4/conf/eth0/rp_filter
echo 0 >=20 /proc/sys/net/ipv4/conf/eth2/rp_filter

echo 3 >=20 /proc/sys/net/ipv4/route/gc_elasticity
echo 1 >=20 /proc/sys/net/ipv4/route/gc_interval
echo 0 >=20 /proc/sys/net/ipv4/route/gc_timeout

ip route flush cache
ip = route=20 flush all
ip route flush table modem0
ip route flush table=20 modem1

ip rule add from $IP1 lookup modem0
ip rule add from = $IP2=20 lookup modem1

ip route add $P1_NET dev $IF1 src $IP1
ip route = add=20 $P2_NET dev $IF2 src $IP2
ip route add $P0_NET dev $IF0 src = $IP0

ip=20 rule add from $P1_NET lookup modem0
ip route add $P0_NET dev $IF0 = table=20 modem0
ip route add 0/0 via $P1 table modem0

ip rule add from = $P2_NET=20 lookup modem1
ip route add $P0_NET dev $IF0 table modem1
ip route = add 0/0=20 via $P2 table modem1

ip route add default = equalize\
 nexthop via=20 $P1 dev $IF1 weight 5\
 nexthop via $P2 dev $IF2 weight=20 5

#=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D
------=_NextPart_000_000F_01C4776E.141F73D0-- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/