From: "Nikolay Kichukov" Date: Thu, 18 Jan 2007 07:13:46 +0000 Subject: Re: [LARTC] egress bandwidth not limited / Message-Id: <002a01c73ad8$50e43af0$0200a8c0@ccja> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Hello Andy, How do one create such a filter to catch arp/other link layer traffic? Can you give us one such example? Thanks, -nik ----- Original Message -----=20 From: "Andy Furniss" To: "Roman Skula" Cc: Sent: Wednesday, January 17, 2007 10:18 PM Subject: Re: [LARTC] egress bandwidth not limited / limitedextremely inaccurately > Roman Skula wrote: > > Andy Furniss napisa=B3(a): > > > >>Roman Skula wrote: > >> > >>>05:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5714 > >>>Gigabit Ethernet (rev a3) > >> > >>You may need to turn off segmentation offload with ethtool -k > > > > A huge, wet kiss for you, this turned my sky blue again. :) > > Lol - I forgot to mention: be carefull about using htb default, your > arp/other link layer end up there. If you don't specify a default htb > will let them through unshaped, you can make a filter to catch the > unclassified IP traffic and send it to the class you want. > > Andy. > > _______________________________________________ > LARTC mailing list > LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc