From: "Andy Hawthorn" Date: Mon, 19 Jan 2004 15:21:57 +0000 Subject: [LARTC] Problem implementing split access Message-Id: <003101c3de9f$fa117400$1101a8c0@andy17> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello, I am attempting to implement load balancing on a firewall to allow me to use two ISPs. I have followed the instructions in section 4.2 of the LARTC HOWTO but have got stuck on the split access section I have the options CONFIG_IP_ADVANCED_ROUTER and CONFIG_IP_MULTIPLE_TABLES in my kernel (2.4.24) and have added routes to the /etc/iproute2/rt_tables file but when I try a command in the form of: ip route add $P1_NET dev $IF1 src $IP1 table T1 such as: ip route add 192.168.10.0/24 dev eth0 src 192.168.10.250 table myisp I get the error: RTNETLINK answers: Invalid argument This sounds like I have missed something that I need in the kernel but everything that was listed in the HOWTO has been included in my kernel. If I try the command without the src argument such as: ip route add 192.168.10.0/24 dev eth0 table myisp ..then I get no errors which would seem to sugest that the src argument is the problem here. Any insight someone might have would be most apreciated! Thanks, Andy _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/