From: Patrick URIE Date: Mon, 5 Feb 2007 13:50:27 +0100 Subject: [U-Boot-Users] I can't debug U-BOOT after relocation in ram Message-ID: <003b01c74924$36ae9590$3401a8c0@plda.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello, I try to debug U-boot in flash with GDB version 6.5 + BDI 2000. I have followed topic about RAM relocation from DENX web. but when U-BOOT is relocated in Ram, I can?t stop it at board_init_r(). My custom Board configuration is: Hardware : --------------- -MPC875, -64MB (Top address 0x4000000) -2MB flash Software : --------------- U-BOOT 1.4.4 in flash at 0xFE000000 Relocation address (read in R5 register) is 0x3FB00000 DER register value is 0x2006000F Thank you for your reply. --------------------------------------- Uri? Patrick Software engineer ReFLEX Custom Embedded Systems 6, rue du Velay - SILIC 1743 Lisses 91047 EVRY Cedex - FRANCE Phone : +33 (0) 169 870 255 (ext. 140) Fax : +33 (0) 164 972 859 --------------------------------------- -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.denx.de/pipermail/u-boot/attachments/20070205/d847c016/attachment.htm