From: "James Lista" Date: Fri, 01 Oct 2004 12:35:16 +0000 Subject: [LARTC] cbq Message-Id: <004301c4a7b3$1b483c80$480710ac@d3lta> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org buddies, I am totally newbie to band control... I created a shell script that generates cbq files like below (for example, someone in my lan with IP 172.16.7.72). my question is: is the file name format and are the lines below right to limit band for this one with this IP ?? ( I read cbq.ini 0.7.3.. and cannot understand it well).. thanks for you attention ---------------------------------------------------------------------------- -------------- ----> cbq-072.out-72 DEVICE=eth0,10Mbit,1Mbit RATE2kbit WEIGHT=3Kbit PRIO=5 RULE2.16.7.72/32, BOUNDED=yes ISOLATED=yes ----> cbq-072.in-72 DEVICE=eth1,10Mbit,1Mbit RATE2kbit WEIGHT=3Kbit PRIO=5 RULE2.16.7.72/32 BOUNDED=yes ISOLATED=yes _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/