From: "Dan White" Date: Wed, 21 Jan 2004 17:08:21 +0000 Subject: [LARTC] HTB and VOIP- Choppy voice quality: What am I doing wrong? Desperate! Message-Id: <005a01c3e041$2c6023a0$e40a0a0a@bmi2541.com> MIME-Version: 1 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0057_01C3DFFE.1E2C1AC0" List-Id: To: lartc@vger.kernel.org This is a multi-part message in MIME format. ------=_NextPart_000_0057_01C3DFFE.1E2C1AC0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello all, ( I apologize if this posts twice ) Here is my situation. I have 3 buildings linked with 100mbit fiber = optics (2 runs that come to the corporate office). I have 3 RH9 boxes, = one at each location. Each box at the remote locations have 4 NICs, one = for the fiber link, one for LAN, one for the VOIP box and one for the = internet connection. The corporate office has 4 NICs also, 1 for each = fiber run to the remotes, one for the VOIP box, one for the LAN = (corporate gets its internet from the remotes). I have drawn a diagram = here Http://208.45.203.98/fiber.jpg All of the gateways are set up properly, and I can communicate in = all directions, and can place calls clearly when the traffic is low. Now = here is my problem. When I dump a big file over the fiber link, the = voice quality goes down considerably. I hit "cancel" on the file, the = quality is back. Here is what I know about the Inter-Tel VOIP box we = use: it uses UDP streams on ports 5000-5018 and 16384 @ 8-18k per side, = per call, over 7 possible channels. Each site has 7 channels, which are = rarely all in use. So, the total bandwidth should be, at max (18k x 2 = directions x 7 channels) is 252k I came in on Saturday alone, and was = able to kill the quality with one call, and one 1gb file in transit. I = have set HTB up as follows: ( 1: ) (1:1) (1:2) (1:10) (1:11)(1:12) Here is my script, it is the same at all 3 sites = http://208.45.203.97/script.txt (I would post it, but it is pretty = long). As you can see I have given 80mbit to the phones (remember, they = should only need 252k!), 16mbit to default, and cut windows file sharing = back to 1mbit, but I still have voice issues during file transfers! I = know the filters are catching the traffic (I did "tc -s -d class show = dev eth1" and watched my numbers while calling, and transferring files, = and the incremented properly) Can anybody help me, I have been screwing = with this for days, and I am at my wits end! I am still relatively new = to all of this, but I always bite off more than I can chew :) Dan White Senior IT Manager=20 Bookmasters Inc. ------=_NextPart_000_0057_01C3DFFE.1E2C1AC0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hello all,
 
    ( I apologize if = this posts=20 twice )
 
    Here is my = situation. I have 3=20 buildings linked with 100mbit fiber optics (2 runs that come to the = corporate=20 office). I have 3 RH9 boxes, one at each location. Each box at the = remote=20 locations have 4 NICs, one for the fiber link, one for LAN, one for=20 the VOIP box and one for the internet connection. The corporate = office has=20 4 NICs also, 1 for each fiber run to the remotes, one for the VOIP box, = one for=20 the LAN (corporate gets its internet from the remotes). I have drawn a = diagram=20 here Http://208.45.203.98/fiber.jpg
 
    All of the gateways = are set up=20 properly, and I can communicate in all directions, and can place calls = clearly=20 when the traffic is low. Now here is my problem. When I dump a big file = over the=20 fiber link, the voice quality goes down considerably. I hit "cancel" on = the=20 file, the quality is back. Here is what I know about the Inter-Tel VOIP = box we=20 use: it uses UDP streams on ports 5000-5018 and 16384 @ 8-18k per = side, per=20 call, over 7 possible channels. Each site has 7 channels, which are = rarely all=20 in use. So, the total bandwidth should be, at max (18k x 2 = directions x 7=20 channels) is 252k I came in on Saturday alone, and was able to kill = the=20 quality with one call, and one 1gb file in transit. I have set HTB up as = follows:
 
           ( = 1:=20 )
 (1:1)         = ;   =20 (1:2)
(1:10)       (1:11)(1:12)
 
Here is my script, it is the same at = all 3 sites http://208.45.203.97/script.txt<= /A> =20 (I would post it, but it is pretty long). As you can see I have given = 80mbit to=20 the phones (remember, they should only need 252k!), 16mbit to default, = and cut=20 windows file sharing back to 1mbit, but I still have voice issues during = file=20 transfers! I know the filters are catching the traffic (I did "tc -s -d = class=20 show dev eth1" and watched my numbers while calling, and transferring = files, and=20 the incremented properly) Can anybody help me, I have been screwing with = this=20 for days, and I am at my wits end! I am still relatively new to all of = this, but=20 I always bite off more than I can chew :)
 
Dan White
Senior IT Manager
Bookmasters Inc.
 
------=_NextPart_000_0057_01C3DFFE.1E2C1AC0-- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/