From: Alexander von Gluck IV Date: Sat, 18 Jan 2020 00:22:38 +0000 Subject: u-boot 32-bit on Raspberry Pi 4 Message-ID: <005a80ac082201b99f0f3952a96a7b91@unixzen.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Has anyone successfully used u-boot on the Raspberry Pi 4 in 32-bit mode? Building via the following: make rpi_4_32b_defconfig ARCH=arm CROSS_COMPILE=arm-none-eabi- make Booting via: * u-boot.bin on Fat32 partition * start.elf from * config.txt on Fat32 partition kernel=u-boot.bin enable_uart=1 arm_64bit=0 Just a black screen, however, no serial uart output Thanks! -- Alex