From: Bryan Wu Date: Tue, 6 Sep 2005 13:03:53 +0800 Subject: [U-Boot-Users] Re: Help for 28F256L30T References: <1125933910.600cc6dcS3092131@student.rmit.edu.au> <003b01c5b282$89ce79f0$27050a0a@jadechip.net> <20050906045354.GA16917@quux.mknod.org> Message-ID: <007c01c5b2a0$60b519c0$27050a0a@jadechip.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Oh, thanks your reply, I tried CFI driver, but it failed. Now I am trying to modified the 28F256L18T code to my platform. It can erase the flash, but can't write. Bryan Wu ----- Original Message ----- From: "Graham Wilson" To: Sent: Tuesday, September 06, 2005 12:53 PM Subject: [U-Boot-Users] Re: Help for 28F256L30T > On Tue, Sep 06, 2005 at 09:30:17AM +0800, Bryan Wu wrote: >> Is there any code for Intel Flash 28F256L30T? I modified the >> 28F256L18T to my system, the operation result displayed on the console >> is ok, but no data write to the Flash chips. And Can I use the CFI >> driver to do this? Is there any hints? > > Intel's website seems to indicate that the chips have a CFI interface. > Have you tried the CFI drivers? > > [1] http://intel.com/design/flcomp/prodbref/251890.htm > > -- > gram > > > ------------------------------------------------------- > SF.Net email is Sponsored by the Better Software Conference & EXPO > September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices > Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA > Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf > _______________________________________________ > U-Boot-Users mailing list > U-Boot-Users at lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/u-boot-users