From: Joakim Tjernlund Date: Thu, 7 Dec 2006 23:08:02 +0100 Subject: [U-Boot-Users] MPC83xx SPI driver In-Reply-To: <1165528582.31193.208.camel@saruman.qstreams.net> Message-ID: <009601c71a4c$29c8ca50$020120ac@Jocke> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de > -----Original Message----- > From: u-boot-users-bounces at lists.sourceforge.net > [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf > Of Ben Warren > Sent: den 7 december 2006 22:56 > To: uboot > Subject: [U-Boot-Users] MPC83xx SPI driver > > Hello, > > I'm ready to re-submit a hard SPI driver for some members of > the MPC83xx > family of CPUs, but am unsure where to put it. While designed for the > MPC834x chips, it should also work with the upcoming MPC8313, if the > online datasheet is accurate. The other 83xx chips handle > SPI with a CPM, so this driver won't work there. Should I put it in > cpu/mpc83xx/, drivers/, or somewhere else? And given the unusual chip > compatibilities, what should the file be called? > > Suggestions? Does it work on a 8321 in QUICC mode? If so then cpu/mpc83xx/qe_spi.c perhaps? Jocke