From: "VideoIP" Date: Wed, 13 Jul 2005 18:46:04 +0000 Subject: =?iso-8859-1?Q?Re:_=5BLARTC=5D_HTB:_=BFhow_do_burst/cburst_work_exactly=3F?= Message-Id: <00af01c587db$2ab1f360$6501a8c0@FLO> List-Id: References: <006901c5877b$6a2feca0$6501a8c0@FLO> In-Reply-To: <006901c5877b$6a2feca0$6501a8c0@FLO> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org : : Also, could you give me an advice or reference on the following? : : I need a child class to allow passage to a video stream that I : : KNOW has mean X kbps and seldom peaks of Y kbps and T seconds. : : Would the best way be to just configure mean=3DX, ceil=3DY? Or should : : I configure mean=CEil=3DX and calculate a cburst that=B4ll allow : : passage of the peaks? Or maybe a third option. : : I cannot recommend an optimal calculation method, though I would : start with X kbps as the rate and Y kbps * T as the burst. After : that, I'd increase rate and decrease burst until there was no : choppiness in the transmitted video stream. Would in that scenario ceil=3Drate or ceil=3DY kbps? It seems to me that if= =20 ceil=3Drate, then there=B4s no use in having a burst bucket, or is there? Thanks again, Florencio=20 _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc