From: john at spectross.com Date: Thu, 28 Feb 2008 21:39:31 +0530 Subject: [U-Boot-Users] RMII on MPC8272ADS Message-ID: <00b101c87a24$522c1090$0401a8c0@John> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, Currently I am testing the RMII ethernet functionality on the MPC8272ADS board. I need help........ I want you to validate my modifications for RMII mode on the ADS board after setting jumpers JP5 & JP10 accordingly. Modifications to U-Boot-1.3.2-rc1: Currently FCC_ETHER_INDEX = 1: /include/configs/MPC8272ADS.h --> #define CONFIG_ADSTYPE CFG_8260ADS to #define CONFIG_ADSTYPE CFG_8272ADS & #define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) /* Full duplex */ to #define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB | FCC_PSMR_RMII) /* Full duplex & RMII mode*/ /board/mpc8260ads/mpc8260ads.c --> miiphy_write(CFG_PHY_ADDR, 16, 0x610); to miiphy_write(CFG_PHY_ADDR, 16, 0x710); Is there something I am missing ? after executing the above mentioned changes ping stopped working ("host not alive")... MII mode worked fine on the same board. Kindly suggest, if more changes would be required. Regds. John