From: Ulf Samuelsson Date: Tue, 12 Feb 2008 21:07:37 +0100 Subject: [U-Boot-Users] sam9263ek not booting uboot dataflash References: <3972542e0802121021x7e80e62aqa90b319f200aa896@mail.gmail.com><47B1E56D.50902@gandalf.sssup.it><3972542e0802121102u782d47cage94bee84bd22124a@mail.gmail.com><47B1EDDC.2070409@gandalf.sssup.it><3972542e0802121107s42a524cdsff8faf6615d0726b@mail.gmail.com><47B1EEE3.7070203@gandalf.sssup.it><3972542e0802121113u48e50ba2x1e5b0d30994f1da7@mail.gmail.com><47B1F240.8040201@gandalf.sssup.it> <3972542e0802121139o130419a2ve22abfdb331b20b8@mail.gmail.com> Message-ID: <017f01c86db2$f4047c00$090514ac@atmel.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de >> >> Hi, >> >> >> >>>> So, do you change the text base? >> >>>> >> >>>> >> >>> No I did not. I don't have a reason to. Why? >> >>> >> Is the new size compatible with the armboot? Do you skip LOW_LEVEL_INIT? > > Yes, it is skipped. From what I understood Bootstrap does the > necessary boot init tasks (althought I would rather put it in uboot). > Do I need to changs this? > You will not be able to store U-Boot in the SDRAM until the SDRAM has been initialized, so that is not an option. Do you use a dataflashcard? It is easy to mix the chip selects. Recompile the original source and see if you can run that. Otherwise play with LEDs. You can also try the SAM9263EK U-Boot-1.2.0 built by buildroot at "buildroot.uclibc.org". Best Regards Ulf Samuelsson