From: "Ming-Ching Tiew" Date: Fri, 27 Aug 2004 04:47:22 +0000 Subject: [LARTC] =?iso-8859-1?Q?RE:_=5BLARTC=5D_Load_Balance_simply_doesn=B4t_work...?= Message-Id: <021101c48bf0$f0d5c590$0100a8c0@newlife> List-Id: References: <005c01c48b6d$90009570$0100a8c0@nueva2> In-Reply-To: <005c01c48b6d$90009570$0100a8c0@nueva2> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org > > > > > > ip route add default scope global nexthop via $P1 dev > $IF1 weight 1 \ > > > nexthop via $P2 dev $IF2 weight 1 > > > > > > > This multipath routing command keep coming up as classic > > way to perform multipath routing for NAT access, which I > > considered it as VERY misleading. > > > > It should only be used if you are NOT using NAT. > > You mean that using NAT its impossible to do load balance or > this is the worng command? If its the wrong command, what=B4s > the right one? Wrong way to do it. Destine for failure ! Imagine if you have several external IP addresses and your connection to a particular application keep changing from one IP to another ... Perhaps you won't see any problem on short sessions or connectionless application but it is definitely a problem for connection oriented applications or security conscious applications. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/