From: "Edward Wildgoose" Subject: Digi96 Full Duplex problem with 16bit samples Date: Tue, 22 Apr 2003 16:30:14 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <02d301c308e4$120d8ef0$cb40a8c0@FRiskMan.com> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org I have a new Digi96/8 PAD card (very impressed with the sound quality), however, I am trying to use it with MythTV to record and playback TV. Either analogue recording or playback work fine, but any attempt to do simultaneous analogue record AND playback is failing. I have tested with aplay + arecord and the card does full duplex analogue without a problem. The only difference with MythTv seems to be that it uses OSS emulation via the /dev/dsp device (this is this OSS isn't it?). To try and simulate this I tried the following: gentoo linux-2.4.20 # sox -t ossdsp -r 44100 -w -c 2 /dev/dsp -t ossdsp -r 44100 -w -c 2 /dev/dsp Which gives the error: sox: Unable to set the sample size to 16 If however, I remove the "-w" flag from the above then everything works OK. It appears that full duplex works in 8 bit mode, but not 16 bit mode? Can anyone confirm or deny this, and is there a workaround to get full duplex (other than coding up a proper ALSA layer for MythTv)? I am using alsa 0.92 and I have also tried 0.90rc6 (and it's on gentoo if this makes a difference). Any help would be appreciated, Thanks ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf