From: "Thibault Le Meur" Subject: RE : [PATCH 1/2] M-Audio USB Date: Fri, 15 Dec 2006 09:55:05 +0100 Message-ID: <030101c72026$ba173e40$161ce4a0@supelec.fr> References: <45821828.6070708@rogers.com> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <45821828.6070708@rogers.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@lists.sourceforge.net Errors-To: alsa-devel-bounces@lists.sourceforge.net To: 'Pavel Polischouk' , alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org > -----Message d'origine----- > De : alsa-devel-bounces@lists.sourceforge.net = > [mailto:alsa-devel-bounces@lists.sourceforge.net] De la part = > de Pavel Polischouk > Envoy=E9 : vendredi 15 d=E9cembre 2006 04:36 > =C0 : alsa-devel@lists.sourceforge.net > Objet : Re: [Alsa-devel] [PATCH 1/2] M-Audio USB > = > = > Thibault Le Meur wrote: > > However, it does not correct the corrupted initialization = > state that = > > occur when the device is turned on before the snd-usb-audio = > module is = > > initialized with a valid device_setup parameter (see below). > > = > There are 2 reasons for this: > 1. The default setting "0" will immediately make the device = > stuck in a = > weird semi-working mode. Avoid. I'll add a check to the next patch = > revision that will REFUSE to load the driver for M-Audio = > unless a valid = > setup parameter is specified. This would break backward compatibility! I know several current users of M-Audio devices that are happy with the current behaviour of the driver (without any device_setup param): mainly because they are using the SPDIF interface which doesn't have the issues we are dealing with here. If we do this, the driver upgrade won't be transparent for them! = > Another approach would be to = > use a mixer = > control to select available configuration (with the default = > of NONE). This sounds better, but may require more work. > 2. If you're using a daemon that loads USB drivers = > automatically, it = > will always load using "default" setting. If a valid device_setup = > parameter is added to /etc/modprobe.conf, it will be possible = > to turn on = > the device before initializing the driver. Sure, that's what I do, but I wanted to do the tests from a clean system that would reflect most users' setup. > > As far as the documentation is concerned, shouldn't it be better to = > > keep an Audiophile-USB.txt file with only the following = > sentence: "Updated > > documentation on this device can now be found in the M-Audio.txt = > > file" ? > > = > Agreed. Great. > Also, I will update the JACK info. Current version can work natively = > with 24bit big-endian interfaces, and also works fine with = > Quattro in = > 4-channel input mode. > Interresting, I wasn't able to have this setup wokring for the Audiophile. Are you using the 4-channel input at the same time as a playback interface (in Full-Duplex) ? Because I think there was a patch to be applied to Alsa to enable Full-Duplex mode with Multi interfaces... Or has it been included in current ALSA release ? > Another problem that I found with Quattro. The driver works fine in = > 24/96k mode, no underruns. But in 44k/48k modes, it's always = > giving me = > JACK xruns, or just skips in arecord, even with the most = > forgiving JACK = > settings (high realtime priority and big buffers). Very strange, I don't think I've seen such issue with teh audiophile usb device. I'll try to test this. > This looks = > counter-intuitive, that the slower mode performs worse than = > faster one. = > Could it be that the driver reserves not enough USB bandwidth from = > hardware, or something similar? What settings could be = > changed to try to = > correct this? No Idea... Sorry. Thibault ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3DDE= VDEV