Message-ID: <060ec1ea-9081-4935-a7d6-8c5a1bdd181e@...1227...> Date: Mon, 26 May 2025 09:31:08 +0200 MIME-Version: 1.0 References: <1e8ccfd451cbf9e6d090bd6a6886e366.squirrel@...2890...> <20250507074438.1326755-1-walter.openvpn@...2889...> <8ba925a1-85c9-4274-a512-32dcec35b147@...1227...> <2bb3487e-6762-40ea-b6ad-2622a879ca21@...2889...> Content-Language: en-GB From: Arne Schwabe In-Reply-To: <2bb3487e-6762-40ea-b6ad-2622a879ca21@...2889...> Subject: Re: [Openvpn-devel] [PATCH] multi.c: Allow floating to a new IP right after connection setup List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit To: Walter Doekes , openvpn-devel@lists.sourceforge.net Am 25.05.25 um 22:27 schrieb Walter Doekes: > Good. Your understanding of the situation is the same. > > I did not yet make a reproducer config -- mostly because I don't think > we're doing anything non-standard. But I did double check that latest > 2.6 is affected, tested both client and server. It is non-standard enough that you are the only ones affected and that we have trouble reproducing it. It would be good to get a pcap of the servers view of the client connection. You can send that in private if you want. I might have some idea what is happening if I can have a look at that. But currently it is just too much guesswork without knowing anything concrete that I can go on. Arne