From: "Matthias Lendholt" Date: Mon, 31 May 2004 15:58:51 +0000 Subject: [LARTC] Wondershaper - question Message-Id: <075301c44728$34740860$016414ac@farnelia> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi, I have a question conercing wondershaper. I'm using the Clarkconnect linux distribution for my linux router and I tried to use wondershaper. On start up of wshaper, there are no errors or any other problems but I'm not sure if it's running correctly. Only one qdisc / one class is used and when I start an uplink ftp transfer, my ping time is growing up to 1700ms - I don't think that there is anything shaped oder scheduled. In the wshaper file I set the up- and downlink values and for the p2p I set this: # low priority source ports NOPRIOPORTSRCF62 # low priority destination ports NOPRIOPORTDSTF62 Then i start it: [root@Astoria bin]# wshaper start [root@Astoria bin]# One or two minutes later (with p2p traffic and some pings) i got this: [root@Astoria bin]# wshaper status qdisc ingress ffff: ---------------- Sent 0 bytes 0 pkts (dropped 0, overlimits 0) qdisc sfq 30: quantum 1514b perturb 10sec Sent 0 bytes 0 pkts (dropped 0, overlimits 0) qdisc sfq 20: quantum 1514b perturb 10sec Sent 0 bytes 0 pkts (dropped 0, overlimits 0) qdisc sfq 10: quantum 1514b perturb 10sec Sent 0 bytes 0 pkts (dropped 0, overlimits 0) qdisc cbq 1: rate 10Mbit (bounded,isolated) prio no-transmit Sent 1116535 bytes 6148 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 624 undertime 0 class cbq 1: root rate 10Mbit (bounded,isolated) prio no-transmit Sent 1117031 bytes 6154 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 624 undertime 0 class cbq 1:10 parent 1:1 leaf 10: rate 120Kbit prio 1 Sent 0 bytes 0 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 624 undertime 0 class cbq 1:1 parent 1: rate 120Kbit (bounded,isolated) prio 5 Sent 0 bytes 0 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 624 undertime 0 class cbq 1:20 parent 1:1 leaf 20: rate 108Kbit prio 2 Sent 0 bytes 0 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 624 undertime 0 class cbq 1:30 parent 1:1 leaf 30: rate 96Kbit prio 2 Sent 0 bytes 0 pkts (dropped 0, overlimits 0) borrowed 0 overactions 0 avgidle 624 undertime 0 [root@Astoria bin]# As you can see, just qdisc 1: is used. The same behavior after hours of running wshaper; only this one qdisc is used. Has anyone an idea why this happens? Thanks, Matthias Lendholt (Berlin, Germany) _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/