From: Ian Kane Date: Mon, 24 Sep 2018 15:46:36 +0000 Subject: [U-Boot] Recommended location of board device tree source (DTS) Message-ID: <08357028f2ff6759f0716a215d0d01c76c61de57.camel@codeblue.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello, new here and learning... The project documentation regarding flat device trees (FDT) ( http://git.denx.de/?p=u-boot.git;a=blob;f=doc/README.fdt-control) recommends device tree source (DTS) be placed in one location that appears inconsistent with practice. The linked README recommends placing DTS files in board//dts/.dts, a very board specific location, yet searching the distributed source tree seems to indicate common practice is to place DTS somewhere in /arch/arm/dts/.dts The documentation reads: Configuration ------------- Use: #define CONFIG_DEFAULT_DEVICE_TREE "" to set the filename of the device tree source. Then put your device treefile into board//dts/.dts This should include your CPU or SOC's device tree file, placed in arch//dts, and then make any adjustments required. Am I missing something obvious? Looking for a little clarification, perhaps it's a simple matter of practice moving forward in front of documentation? Thank you!