From: Stefan Roese Date: Thu, 11 Apr 2019 14:16:42 +0200 Subject: [U-Boot] [PATCH v3 4/4] arm: mvebu: Add DB-XC3-24G4XG board In-Reply-To: <20190411102253.14202-5-judge.packham@gmail.com> References: <20190411102253.14202-1-judge.packham@gmail.com> <20190411102253.14202-5-judge.packham@gmail.com> Message-ID: <09c740b2-e16b-e027-8580-a7490c08b958@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 11.04.19 12:22, Chris Packham wrote: > From: Chris Packham > > The DB-XC3-24G4XG is a switch development board from Marvell. It can > either use and external CPU card such as the db-88f6820-amc or the > internal CPU that is integrated into the switch. > > Add support for running U-Boot on the internal CPU and enable the USB, > SPI and NAND peripherals. For now this needs the bin_hdr from the > Marvell U-Boot for this board. > > Signed-off-by: Chris Packham > --- > > Changes in v3: > - Adjust path to binary.0 in kwbimage.cfg to handle external build > output directories. > > Changes in v2: > - u-boot specific changes in u-boot.dtsi > - remove unnecessary entries from board config.h > - move some changes to earlier patches Applied to u-boot-marvell/master. Thanks, Stefan