From: kgene.kim@samsung.com (Kukjin Kim) Date: Thu, 06 Jun 2013 10:55:28 +0900 Subject: [PATCH] ARM: dts: add ohci and ehci controller nodes for EXYNOS5440 In-Reply-To: <09d701ce6258$64ef1fc0$2ecd5f40$%kim@samsung.com> References: <09d701ce6258$64ef1fc0$2ecd5f40$%kim@samsung.com> Message-ID: <09d801ce6258$eb64a9d0$c22dfd70$%kim@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Kukjin Kim wrote: > > From: Thomas Abraham > > EXYNOS5440 includes both OHCI and EHCI usb host controllers. > Add device tree nodes for both of these controllers. > > Signed-off-by: Thomas Abraham > Signed-off-by: Kukjin Kim > --- > arch/arm/boot/dts/exynos5440.dtsi | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi > index 2607739..f3faabf 100644 > --- a/arch/arm/boot/dts/exynos5440.dtsi > +++ b/arch/arm/boot/dts/exynos5440.dtsi > @@ -225,4 +225,19 @@ > clock-names = "sata"; > }; > > + ohci at 220000 { > + compatible = "samsung,exynos-ohci"; Oops, the EHCI and OHCI controllers on exynos5440 do not need any explicit phy configuration. So need to assign a different compatible value for these controllers... If no problem, let me take this patch into samsung tree with fix. + compatible = "samsung,exynos5440-ohci"; > + reg = <0x220000 0x1000>; > + interrupts = <0 29 0>; > + clocks = <&clock 24>; > + clock-names = "usbhost"; > + }; > + > + ehci at 221000 { > + compatible = "samsung,exynos-ehci"; Same as above. + compatible = "samsung,exynos5440-ehci"; > + reg = <0x221000 0x1000>; > + interrupts = <0 29 0>; > + clocks = <&clock 24>; > + clock-names = "usbhost"; > + }; > }; > -- > 1.7.10.4