From: vanDongen/Gilcher Subject: rme96 and adat, problems opening for capture when clock-master Date: Mon, 1 Jul 2002 12:29:09 +0000 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <0ChZyM167A140000.gml@xs4all.nl> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net Cc: Anders.Torger@xs4all.nl, torger@ludd.luth.se List-Id: alsa-devel@alsa-project.org Hello, I am using a rme 96/8 card. I encounter a problem whenever I try to open the adat device, which is the second device on the card, for capture. I get an input/output error. The problem occurs when I switch from spdif to adat (from hw:0,0 to hw:0,1 in my case) _and_ the clock mode is master. If I set the card to slave mode and change the settings on my adda converter, there is no problem. Playback only will always work. So f.i. if I start pd, with hw:0,1 as audio device, I have to start once , with an error message that it can't open the card for capture. Then I quit, and start pd again. The second time it works for capture as well as for playback. Is this a bug in the driver? regards Gerard ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf