From: "David Boreham" Date: Wed, 22 Dec 2004 18:04:24 +0000 Subject: Re: [LARTC] Is 'publish' proxy arp still broken ? Message-Id: <0c1b01c4e850$ab7f2240$da529145@mtbrook.bozemanpass.com> List-Id: References: <09c301c4e79c$4b721a60$da529145@mtbrook.bozemanpass.com> In-Reply-To: <09c301c4e79c$4b721a60$da529145@mtbrook.bozemanpass.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > I don't have this enabled and the syntax "arp -i eth0 -Ds 1.2.3.4 eth0 > pub" is > working as expected. Interesting. It may be that I became confused about this in my random flailings. I'm doing this on a production router so I don't have much potential to experiment. I'll try disabling proxy_arp and see what happens... > With /proc/.../proxy_arp enabled it seems that linux answers arp request > for all ip addresses, which are routed to other interfaces, e.g. with this > routing table: Yes, your text would make a worthy addition to the existing 'howto' (which is rather lacking in clarity). _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/