From: Patrick DELAUNAY Date: Mon, 30 Sep 2019 08:12:33 +0000 Subject: [U-Boot] [Uboot-stm32] [RESEND PATCH 1/2] dm: Tidy up dump output when there are many devices In-Reply-To: References: <1564750081-31319-1-git-send-email-patrick.delaunay@st.com> Message-ID: <0c8dcec3e6ae45c4bc11eb4bcaa4ea84@SFHDAG6NODE3.st.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Simon, > To: Patrick DELAUNAY > Cc: U-Boot STM32 ; U-Boot > > Hi Patrick, > > On Fri, 2 Aug 2019 at 05:48, Patrick Delaunay wrote: > > > > At present the 'Index' column of 'dm tree' assumes there is two > > digits, this patch increase it to 3 digits. > > > > It also aligns output of 'dm uclass', assuming the same 3 digits index. > > > > The boards with CONFIG_PINCTRL_FULL activated have one pinconfig by > > pin configuration, so they can have more than 100 devices pinconfig > > (for example with stm32mp157c-ev1 board we have > > 106 pinconfig node). > > > > Signed-off-by: Patrick Delaunay > > --- > > > > stm32mp157c-ev1 trace before the patch > > > > This seems fine but it breaks the tests (make qcheck). Can you please fix that? Sure, I will sent a v2 today > Regards, > Simon > _______________________________________________ > Uboot-stm32 mailing list > Uboot-stm32 at st-md-mailman.stormreply.com > https://st-md-mailman.stormreply.com/mailman/listinfo/uboot-stm32