From: Thomas Charbonnel Subject: HDSP driver : distortion at normal volume settings Date: 31 Aug 2002 20:55:06 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <1030820108.7184.46.camel@satellite.undata.org> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Received: from mel-rto2.wanadoo.fr (smtp-out-2.wanadoo.fr [193.252.19.254]) by alsa.alsa-project.org (8.9.3/8.9.3/SuSE Linux 8.9.3-0.1) with ESMTP id UAA00391 for ; Sat, 31 Aug 2002 20:56:52 +0200 Received: from mel-rta10.wanadoo.fr (193.252.19.193) by mel-rto2.wanadoo.fr (6.5.007) id 3D5392B60091F40D for alsa-devel@alsa-project.org; Sat, 31 Aug 2002 20:56:15 +0200 Received: from satellite.undata.org (193.252.186.224) by mel-rta10.wanadoo.fr (6.5.007) id 3D6EE88E000C6B08 for alsa-devel@alsa-project.org; Sat, 31 Aug 2002 20:56:15 +0200 Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org Hi Paul, I've been testing the hdsp driver for two days now, and noticed some distortion in the audio signal at normal to high volume levels (roughly above 80%). Playing a 0db sine in pd (using OSS emulation), I could even hear distortion above 50% (sine turning to square). I'm using the multiface, and didn't change the factory jumper settings. This is not the first time I notice distortion at high level with alsa drivers (other times were with pci soundblaster and intel810). Is this the normal alsa behavior (50% = 0db, more actively boosting the signal, in which case I should reconsider my definition of "normal volume setting") ? Thomas p.s: [slightly OT] Is there a totalmix linux equivalent on the way ? ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390