From: m Subject: Re: Re: [linux-audio-user] Evolution UC16 problems, modules.conf for usb-midi and usb-audio together Date: 23 Oct 2002 21:17:23 +0100 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <1035404247.4407.1.camel@hamish.iriXx.org> References: Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel List-Id: alsa-devel@alsa-project.org On Wed, 2002-10-23 at 14:00, Clemens Ladisch wrote: > I assumed that you wanted to use a Quattro and a UC16 together. In this > case, you need one entry for each card, although they're handled by the > same driver. > > The snd-card-x entries are used for autoloading: when you try to access > PCM device hw:x,y and this device doesn't yet exist, ALSA knowns that it > should load the driver specified by snd-card-x. thanks, that helps a lot... as you can guess i'm new-ish to working with alsa although not so new to linux sound... bw m -- iriXx www.iriXx.org copyleft: creativity, technology and freedom? info@copyleftmedia.org.uk www.copyleftmedia.org.uk _ ( ) ascii ribbon against html email X / \ cat /dev/sda1 > /dev/dsp *** stopping make sense *** ------------------------------------------------------- This sf.net email is sponsored by: Influence the future of Java(TM) technology. Join the Java Community Process(SM) (JCP(SM)) program now. http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0002en