From: knuarv@nith.no Subject: Need help with RME Hammerfall Lite (DIGI 9636) and Alsa 0.9.2 Date: Sat, 5 Apr 2003 18:22:09 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <1049559729.3e8f02b1b1634@webmail.nith.no> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org I'm interested in developing audio applications in Linux, using Alsa for output. However, I still haven't figured out how to access the various channels of my RME DIGI 9636, or even playing back stereo tracks. I gather from earlier posts on this list I'm not the only one with this problem, but I've yet to see a real solution? I thought Alsa was a good match for this card, but so far its involved more hassle than I expected :\ The conf system remains a mystery to me, can I make use of the /usr/share/alsa/cards/RME9636.conf file in any way? I have set up an .asoundrc file according to examples. Any help would be greatly appreciated. Regards Arve Knudsen ------------------------------------------------------- This SF.net email is sponsored by: ValueWeb: Dedicated Hosting for just $79/mo with 500 GB of bandwidth! No other company gives more support or power for your dedicated server http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/