From: Thomas Charbonnel Subject: Re: RME9652 HDSP and DSP status? Date: 09 Apr 2003 10:00:06 +0200 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <1049875206.1378.24.camel@satellite.undata.org> References: <200304090905.50939.torger@ludd.luth.se> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <200304090905.50939.torger@ludd.luth.se> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Anders Torger Cc: alsa-devel List-Id: alsa-devel@alsa-project.org > I'm a bit uncertain which of RME's hammerfall cards that currently work > with ALSA (cvs or stable). Looking at RME's website, these are the RME > Hammerfall products: > I'll answer when I can. > RME Hammerfall DSP - Cardbus or PCI interface with breakout boxes > http://www.rme-audio.de/english/hdsp/cardpci.htm > http://www.rme-audio.de/english/hdsp/digifa.htm > http://www.rme-audio.de/english/hdsp/multifa.htm > Support is in stable for older revisions (0xa card firmware). Support is in cvs for newer cards, and updated card firmwares. (Warning : "firmware" can be confusing - it can refer both to the pci or cardbus card flashable firmware or to the FPGA firmware which needs to be loaded in the card when powered on.) > RME HDSP9652 - the new version of RME DIGI9652 > http://www.rme-audio.de/english/hdsp/hdsp9652.htm > Support in cvs (with the patch I just sent). > The only cards I know work with ALSA from own experience, is the RME > DIGI9652 and RME DIGI9636 (aka "RME Hammerfall" and "RME Hammerfall > Light"). > > The ALSA sound card matrix state support for Hammerfall DSP as well. > Does this include both the Cardbus and PCI interface, and both breakout > boxes (digiface and multiface)? Are there any limitations in > functionality? In stable version there are (see above + you can't use rates > 48000 Hz) Cvs should be really closer to the functionalities of the windows and mac versions. The only missing things are : totalmix (coming soon) and Adat Sync Timecode support. > > Does the rme9652 driver work with the new Hammefall version, HDSP9652? > No, the snd-hdsp driver should be used. Thomas ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf