From: jfm3 Subject: pcmcia hdsp problems Date: 08 May 2003 12:25:34 -0400 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <1052411146.1361.54.camel@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: ALSA Developer List List-Id: alsa-devel@alsa-project.org I'm running the latest Planet CCRMA on Redhat 8. This is alsa 9.2 and kernel 2.4.20 with the usual audio patches. I've taken the plunge and acquired a hdsp Multiface. I'm using it with a PCMCIA interface. I put 'modprobe snd-hammerfall-mem enable=1' as the first thing that happens in /etc/rc.sysinit. It doesn't seem to allocate any memory. When the machine first boots with the PCMCIA card in, it lists it as this: $ lspci ... 01:00.0 Class ffff: Illegal Vendor ID: Unknown device ffff (rev ff) If I remove the card with cardctl eject and put it back in, it shows up. $ lspci ... 01:00.0 Multimedia audio controller: Xilinx, Inc. RME Hammerfall DSP (rev 0b) At this point I can reload snd-hammerfall-mem and snd-hdsp and they don't complain. The bright red HOST light is still on though. Of course, at this point, it is probably too late for snd-hammerfall-mem to have been loaded correctly. Does the enable argument to snd-hammerfall-mem do anything anymore? Any other ideas? -- (jfm3 2838 BCBA 93BA 3058 ED95 A42C 37DB 66D1 B43C 9FD0) ------------------------------------------------------- Enterprise Linux Forum Conference & Expo, June 4-6, 2003, Santa Clara The only event dedicated to issues related to Linux enterprise solutions www.enterpriselinuxforum.com