From: Mark Knecht Subject: Re: hdsp patch Date: 15 Jun 2003 20:27:49 -0700 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <1055734069.2741.66.camel@Wizard.knechthome.com> References: <1055734014.2748.64.camel@Wizard.knechthome.com> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1055734014.2748.64.camel@Wizard.knechthome.com> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Paul Davis Cc: Alsa-Devel List-Id: alsa-devel@alsa-project.org On Sun, 2003-06-15 at 20:26, Mark Knecht wrote: > Cool. Something to look for anyway.... > > 15 minutes later. > > Bingo! OK, so the new driver hadn't gotten moved to the right place. It > seems to be there now. I'm getting sound, but it's full volume and I > don't seem to be able to turn it down. (And I only have a few more > minutes before my kid goes to sleep. Or tries to...) ;-) > > I have alsamixer up and running, and the volumes turned down to 6 and > it's still screaming loud. Is this like the old driver where the mixer > didn't work at all? Or have I not set the right things? > > The other thing I notice is I only seem to be able to set 24 values in > my little script to set volumes. The driver I just replaced allowed me > to set all 26. > > OK, so a lot of progress, but I need to be able to reduce the volume > badly!!! > > What can I send you to see if it's my problem? > > Also, please answer - do I need to set routing paths through the HDSP > FPGA to get the mixer working? Can you supply a script to do that if > it's necessary? > > Thanks, > Mark BTW: Wizard rme9652 # cat /proc/asound/card0/hdsp RME Hammerfall HDSP 9652 (Card #1) Buffers: capture de400000 playback de200000 IRQ: 17 Registers bus: 0xe8800000 VM: 0xe4cf7000 Control register: 0x10080de Control2 register: 0x800 Status register: 0x2040008 Status2 register: 0xffff8061 FIFO status: 0 MIDI1 Output status: 0xffffff00 MIDI1 Input status: 0xffffff00 MIDI2 Output status: 0xffffff00 MIDI2 Input status: 0xffffff00 Buffer Size (Latency): 8192 samples (2 periods of 32768 bytes) Hardware pointer (frames): 0 Passthru: no Line out: on Firmware version: 1 Sample Clock Source: Internal 48 kHz Preferred Sync Reference: ADAT1 AutoSync Reference: ADAT1 AutoSync Frequency: 48000 System Clock Mode: Master System Clock Frequency: 48000 IEC958 input: Internal IEC958 output: Coaxial only IEC958 quality: Consumer IEC958 emphasis: off IEC958 NonAudio: off IEC958 sample rate: Error flag set ADAT1: Sync ADAT2: No Lock ADAT3: No Lock SPDIF: No Lock Word Clock: No Lock ADAT Sync: No Lock Wizard rme9652 # ------------------------------------------------------- This SF.NET email is sponsored by: eBay Great deals on office technology -- on eBay now! Click here: http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5