From: Mark Knecht Subject: Re: HDSP 9652: Input channel corruption Date: Wed, 08 Oct 2003 21:07:28 -0700 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <1065672448.3693.12.camel@Wizard.knechthome.com> References: <20031009111238.B5188@nautronix.com.au> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20031009111238.B5188@nautronix.com.au> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: Alsa-Devel List-Id: alsa-devel@alsa-project.org On Wed, 2003-10-08 at 20:12, Nick Arnold wrote: > The symptoms: > ------------ > > We connect a sine wave to the first 12 channels and record them, and see > three channels -- 0, 4, and 8 -- are "corrupted". The remaining channels > appear to be well-formed and look as we expect them to. When you say the 'first 12 channels', are you speaking of the alsa:playback channels, or are you attaching a sine wave the the ADAT input channels from an external source? I'm not clear on that. > > It seems most likely to be some code in the driver, or perhaps the mixer is > responsible for this incorrect ordering. OK, first, I apologize, but Thomas and I never looked at 96KHz operation, and to the best of my knowledge it was only our debug that went into the Aug. 27th patch. I think this means you are on new ground. Thomas and I saw a similar problem at 44.1KHz with ADAT input signals at one point. In hdspmixer I was getting green audio and yellow peak information that did not make sense. I do not remember how I came to the conclusion that there was an ordering problem, but Thomas pretty quickly found it once I pointed it out. Possibly we only fixed normal speed operation and missed the double speed equivalent problem. > > The questions are: > > - could this be a bug, perhaps in the hdsp driver? I think possibly yes. > > - alternatively, could this be due to some mixer setting that has been > turned on by default unbeknownst to us? if so, how can we turn this > off? I do not think this is likely, or at least I do not know of anything you can do. > > any help much appreciated, I think I'm not helping much... > > nick. ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php