From: alsa-devel@robdye.net Subject: Fwd: Re: Names of things Date: Wed, 15 Oct 2003 14:43:42 -0700 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <1066254222.3f8dbf8ecaa9d@scorpio.lunarpages.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org This was intended for the whole list: ----- Forwarded message from alsa-devel@robdye.net ----- Date: Wed, 15 Oct 2003 13:21:20 -0700 From: alsa-devel@robdye.net Reply-To: alsa-devel@robdye.net Subject: Re: [Alsa-devel] Names of things To: tsw@johana.com Quoting Tom Watson : > > I would also like to have a "note" explain somewhere that "LFE" is a > synonym for "Sub_woofer" > LFE is not a synonym for Subwoofer, and should not be used as such. It is a bit confusing and due mostly to histroical reasons (film soundtracks). The two are as follows: LFE -- the ".1" channel in a 5.1, 7.1, etc. _delivery_ medium. It is supposed to contain only high-level (loud) bass material (120Hz absolute max, usually the cutoff is lower), that is _not absolutely essential_ to the program. It may contain nothing at all. In all cases bass material must be present (probably at a reduced level) in the main channels as well. subwoofer -- the channel that feeds a subwoofer, if present, in the _listening environment_. The subwoofer is expected to handle bass material that any of the other speakers are not capable of handling. Thus, bass from any of the main channels may be diverted to the subwoofer. If there is no subwoofer present, and the main speakers are capable of handle extreme bass, the LFE channel may be diverted to main speakers. If there are no speakers capable of handling extreme bass, the LFE channel may be discarded. The process of converting the 5.1 channels on the delivery medium to the appropriate speaker feeds (possibly including a subwoofer) is handled by a system known as "bass management". Any Dolby Digital decoder is required to have some form of bass management, though it may be very rudimentary and not adequate for the actual listening setup. If you want the full explanation, search the archives for the sursound@music.vt.edu mailing list, or go there and ask. But, be prepared for a barage of answers and maybe a minor religous war. Also see: http://www.dolby.com/tech/c.in.0011.LFE.pdf --Rob ----- End forwarded message ----- ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. SourceForge.net hosts over 70,000 Open Source Projects. See the people who have HELPED US provide better services: Click here: http://sourceforge.net/supporters.php