From: Ray Heasman Subject: Re: Occasional metallic sound when recording (cs46xx) Date: Thu, 23 Oct 2003 13:12:15 -0700 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <1066939934.8767.119.camel@maze.mythral.org> References: <20031022162219.GA29956@chapus.net> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20031022162219.GA29956@chapus.net> Errors-To: alsa-devel-admin@lists.sourceforge.net List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: To: "Eloy A. Paris" Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org On Wed, 2003-10-22 at 09:22, Eloy A. Paris wrote: > Hello, > > I am trying to troubleshoot a very annoying problem I have with a Santa > Cruz Turtle Beach (cs46xx). Sometimes, when recording, the recorded > sound is very metallic. If when I get the metallic sound I run alsamixer > and toggle the capture facility of the ADC on and off, sound is fixed > and back to normal. > My personal experience (not with ALSA, but other things) is that you can get a horrid metallic sound when a signal is mixed with itself with a small (a few samples) delay. So, this could be some sort of out by one error causing the signal to get mixed with a delayed version of itself. The other option that occurs to me is that perhaps there is a routing problem with the signals - ie... an audio output is being "monitored" and mixed back into the input. I have found it very easy to do this with some applications with the ALSA drivers - they unintentionally produce an output which gets mixed back into the input. The solution is to mute all the stuff you don't want using alsamixer. A good thing to try would be to set up GnomeMeeting on your alsa card. It has a test mode that makes it easy to tell if you are getting an unintentional loopback. Hope this helps, Ray ------------------------------------------------------- This SF.net email is sponsored by: The SF.net Donation Program. Do you like what SourceForge.net is doing for the Open Source Community? Make a contribution, and help us add new features and functionality. Click here: http://sourceforge.net/donate/