From: Noel Bush Subject: no sound with 1.0.0 release Date: Thu, 11 Dec 2003 23:04:03 -0500 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <1071201843.1980.9.camel@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org I am using the planetccrma-core distribution. Recently I tried upgrading, via that distro, to the alsa 1.0.0 packages. I found that after this upgrade, I was unable to hear any sound when using any app (simplest test, using aplay on a wav file). I did make sure that all relevant controls were unmuted. I found that all alsa modules were indeed loaded. There were no error messages when starting the alsasound service, and no error messages when running any sound apps (alsamixer, aplay, ecasound, etc.) Using ecasignalview showed the meter bouncing up and down...no sound. I was only able to regain sound by downgrading to the 0.9.8 version. Here I will try to provide all relevant info; please let me know what else I can provide to help. The packages to which I upgraded: # rpm -qa | grep ^alsa alsa-firmware-1.0.0-1.rc2.cvs.rhfc1.ccrma alsa-driver-1.0.0-1.rc2.cvs.rhfc1.ccrma alsa-lib-1.0.0-1.rc2.cvs.rhfc1.ccrma alsaplayer-0.99.75-1.rhfc1.ccrma alsa-utils-1.0.0-1.rc2.cvs.rhfc1.ccrma alsa-tools-1.0.0-1.rc2.cvs.rhfc1.ccrma alsa-kernel-2.4.23-1.ll.rhfc1.ccrma-1.0.0-1.rc2.cvs.rhfc1.ccrma alsa-lib-devel-1.0.0-1.rc2.cvs.rhfc1.ccrma The kernel I was using: # uname -r 2.4.23-1.ll.rhfc1.ccrma Output from lspci about my soundcard: # lspci -v -v [...] 01:0a.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03) Subsystem: Creative Labs SB0090 Audigy Player Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-