From: AthlonRob <AthlonRob@axpr.net>
Subject: Re: patch doesn't apply cleanly on 2.4.22
Date: Mon, 15 Dec 2003 11:35:58 -0800
Sender: cpufreq-bounces@www.linux.org.uk
Message-ID: <1071516958.30492.64.camel@dell.linux.box>
References: <20031215183708.GA656@kukaracha.sotano>
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit
In-Reply-To: <20031215183708.GA656@kukaracha.sotano>
Errors-To: cpufreq-bounces@www.linux.org.uk
Content-Type: text/plain; charset="us-ascii"
To: cpufreq@www.linux.org.uk

On Mon, 2003-12-15 at 10:37, paul wisehart wrote:

> I have this patch: cpufreq-LINUX_2_4-20031212.tar.bz2
> It won't patch cleanly onto a stock kernel.org 2.4.22 kernel-source.
> 
> Before I get any further, can someone verify that this patch is for 2.4.22, or
> should I be using 2.4.23(, or something else?)?

Hey Paul-

I'm about 95% certain that patch isn't for 2.4.22... it's going to
either be for 2.4.23 or for 2.4.24-pre1.  My money is on 2.4.23.

However... if you want CPU Frequency support, your best bet is going to
be with the 2.6.0-test series of kernels.. IMHO, there's no good reason
to stick with 2.4.x.  :-)

I jumped to 2.6.0-test when I couldn't get CPUFreq working with a kernel
that worked with the low latency patch.  I haven't looked back.

Rob