From: PSC Date: Wed, 14 Jan 2004 05:37:53 +0000 Subject: [LARTC] public subnet routing Message-Id: <1074058673.1174.11.camel@boxen.charter.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Just wondering if someone could answer this question for me. I would like to route public addresses only. Their will be no firewall but maybe a few rules to deny certain types of traffic. Here is the configuration of the router. My provider gave a me a /30 link to their router also they gave me a /25 network for my customers public ip's Their cisco router has static route entrys for my public subnet The router has been configured as follows eth0 has been configured with : 205.95.67.102/30 eth1 is configured as 209.95.45.1/25 and is the gateway for my customers. Beside ip_forwarding being enabled is their anything that I need to do so my customers can access the ouside and the public to access their ip's. Thanks in advance for the help _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/